2010 Dodge Ram Pickup 1500 Oil Change in Sandy, UT

The typical oil change price range is $69–$129 at Larry H. Miller Chrysler Jeep Dodge Ram Sandy with up-front pricing.

That range reflects use of OEM-spec oil and filter and the dealer-level multi-point inspection offered at our Sandy service center. For accurate pricing on your 2010 Dodge Ram Pickup 1500, tell our service team about towing use or severe-duty driving so we can confirm the right oil and parts.

• Includes OEM-spec oil and Mopar filter where applicable
• Full multi-point inspection tailored to 5.7L V8 needs
• Up-front pricing and documented service records

An oil change for a 2010 Dodge Ram Pickup 1500 typically takes about 45 minutes at our dealership service lane.

This timeframe covers draining and replacing oil, fitting a new OEM or equivalent filter, and performing a multi-point inspection important for a 5.7L V8 truck used in towing or daily commuting. Peak hours and additional repairs can extend the visit, so consider scheduling ahead.

• Standard service lane time: ~45 minutes
• Includes visual checks of fluids and belts on the 5.7L V8
• Book a convenient slot via our schedule service page

Follow the OEM maintenance schedule printed in your owner's manual for the 2010 Dodge Ram Pickup 1500; intervals vary with duty cycle and driving conditions.

Severe‑duty conditions common around Sandy—frequent towing, canyon trips, or extended idling in stop-and-go traffic—can shorten recommended intervals. Keep detailed service records at Larry H. Miller Chrysler Jeep Dodge Ram Sandy to support maintenance tracking and warranty compliance.

• Check your vehicle owner's manual for the exact OEM interval
• Consider shorter intervals if you tow regularly or drive in dusty/winter conditions
• Dealer service entries help maintain documented history for warranty purposes

The 2010 Dodge Ram Pickup 1500 should use the OEM-recommended viscosity and oil specification listed in the owner's manual; your dealer can confirm the exact spec for the 5.7L V8.

Using the correct oil viscosity and meeting OEM specifications helps preserve the 5.7L's horsepower and torque characteristics, especially under towing loads around the Salt Lake Valley. Bring your owner's manual or VIN when you visit Larry H. Miller Chrysler Jeep Dodge Ram Sandy to ensure we fit the proper oil and filter.

• OEM-recommended viscosity is specified in the owner's manual
• Dealer service will match oil to engine requirements and local climate
• Proper oil supports towing capacity and engine longevity

The exact oil capacity for a 2010 Dodge Ram Pickup 1500 depends on the engine configuration and filter used and should be confirmed in the owner's manual or by our service advisors.

Estimating capacity without the VIN or engine variant risks under- or over-filling the 5.7L V8. Bring your truck to Larry H. Miller Chrysler Jeep Dodge Ram Sandy or provide your VIN so technicians can fill the correct quart amount and record the service for future reference.

• Confirm capacity from the owner’s manual or VIN lookup
• Dealer fills to OEM specifications and checks for proper level after warm-up
• Service record kept on file for warranty and resale value

Dealer service includes OEM-spec oil and filter, a documented multi-point inspection, and service records that support warranty compliance, whereas quick-lube shops often focus on speed and lower upfront price.

For the 2010 Dodge Ram Pickup 1500—especially if you tow, use the truck in snow or dusty conditions, or plan to keep documented maintenance for resale—dealer service provides traceable maintenance history. Quick-lube shops can be convenient for basic changes, but they may not always use OEM parts or provide the same level of documentation.

• Dealer: OEM-spec oil/filter, multi-point inspection, recorded service history
• Quick-lube: faster, often lower price, variable parts and documentation
• Choose based on budget, warranty needs, and how you use the truck

Skipping scheduled oil changes can put warranty coverage at risk because manufacturers require proof of proper maintenance for related claims.

Keeping documented service records—showing dates, mileage, and the parts used—helps demonstrate compliance with the maintenance schedule for your 2010 Dodge Ram Pickup 1500. Using authorized service centers like Larry H. Miller Chrysler Jeep Dodge Ram Sandy makes documentation straightforward if warranty repairs are needed.

• Maintain records of every oil change with mileage and receipts
• Manufacturer warranty repairs commonly request proof of scheduled maintenance
• Dealer service entries are logged and available if warranty work arises

Conventional oils are basic mineral oils, synthetic blends mix synthetic with conventional, and full synthetics offer the highest thermal stability and flow characteristics for modern engines.

For the 2010 Dodge Ram Pickup 1500, engine performance under towing, cold starts in Utah winters, and high-temperature operation in canyon runs can influence the best oil choice. Consult the owner's manual or our service advisors to match oil type to the 5.7L V8's needs and your driving patterns.

• Conventional: lower cost, adequate for light-duty driving
• Synthetic blend: compromise between protection and cost
• Full synthetic: better high- and low-temperature protection, often recommended for towing or severe use

The 2010 Dodge Ram Pickup 1500 sees a range of driving patterns across the southern Salt Lake Valley—from daily commutes on I‑15 to weekend canyon runs. Sandy’s cold winters affect oil pumpability at start-up, while summer towing to trailheads increases thermal stress on the 5.7L V8. We service residents of Sandy, Draper, and South Jordan with work that reflects local climate impact and duty cycles. Our service advisors will review your usage—commuting, towing, or off‑highway—and recommend the correct oil type and interval for the 2010 Dodge Ram Pickup 1500 based on those conditions. Visit our service center at 10905 South Auto Mall Drive or schedule service online for a tailored inspection and maintenance plan.

An oil change for the 2010 Dodge Ram Pickup 1500 includes a complete drain and refill with the oil grade specified for your engine, replacement of the oil filter with an OEM or equivalent part, and a multi-point inspection focused on common wear items for the 5.7L V8. Technicians check fluid levels, belts, hoses, tire pressure, and battery condition, and log the service in your vehicle history. Service entries help support warranty needs and resale value. See current offers on our service specials and schedule service to reserve a convenient appointment.

Confirm the exact oil viscosity and capacity for your 2010 Dodge Ram Pickup 1500 in the owner’s manual or with a VIN lookup so the 5.7L V8 receives the correct OEM-spec oil. Proper oil viscosity supports the engine’s 390 hp and 407 lb-ft torque delivery and helps maintain towing capability. Our technicians will verify the required oil spec and filter part number before service, note any common engine-related advisories applicable to this model, and complete a final level check after warm-up. Bring your 2010 Dodge Ram Pickup 1500 to Larry H. Miller Chrysler Jeep Dodge Ram Sandy in Sandy for an OEM-spec oil change — schedule service.