2010 Dodge Ram Pickup 3500 Oil Change in Sandy, UT

$199–$279 is the typical oil change price range for a 2010 Dodge Ram Pickup 3500 at Larry H. Miller Chrysler Jeep Dodge Ram Sandy, with up-front pricing provided.

Diesel oil changes for the 2010 Dodge Ram Pickup 3500 use higher-capacity, OEM-spec oils and a heavier-duty filter, which influences cost compared with light‑car services. LHM Sandy Jeep lists final pricing at check-in and can apply service specials when available.

• Includes OEM-spec diesel oil and OEM or equivalent filter
• Price reflects larger oil capacity for the 6.7L turbo diesel
• Up-front pricing provided at Larry H. Miller Chrysler Jeep Dodge Ram Sandy

An oil change for a 2010 Dodge Ram Pickup 3500 typically takes about 60 minutes at a dealership service center.

Dealership service appointments factor in drain/fill time for the larger diesel oil capacity, OEM filter replacement, a multi‑point inspection, and any fluid top‑offs. Time can vary if additional repairs or diagnostics are needed after inspection.

• Average service bay time: ~60 minutes
• Includes multi‑point inspection and fluid checks
• Schedule ahead to minimize wait: schedule service

The 2010 Dodge Ram Pickup 3500 generally follows a 10,000‑mile interval under normal driving and about 5,000 miles under severe or heavy‑duty use.

Diesel trucks that tow frequently, operate in dusty conditions, or perform many cold starts are considered severe‑duty; in those cases shorten the interval. Keeping a written service record helps show compliance with the recommended maintenance schedule.

• Normal driving: ~10,000 miles between oil changes
• Severe duty (towing, heavy idling, dusty roads): ~5,000 miles
• Document services to support warranty claims and resale value

The 2010 Dodge Ram Pickup 3500 with the 6.7L turbo diesel requires an OEM‑specified heavy‑duty diesel oil meeting API CJ‑4 (commonly SAE 15W‑40) — full synthetic is recommended for extended protection.

Using an oil that meets the OEM diesel specification preserves engine longevity and turbocharger protection at the higher torque and temperatures produced by the 6.7L inline‑6. LHM Sandy Jeep installs oils that meet factory specs during service appointments.

• OEM spec: diesel-service API CJ‑4 (typical viscosity 15W‑40)
• Full synthetic oils offer better thermal stability for turbocharged diesels
• Always ask for OEM‑spec oil and filter at service check‑in

The 2010 Dodge Ram Pickup 3500's 6.7L diesel engine requires approximately 12 quarts of engine oil when replacing the filter.

The larger oil capacity reflects the engine size and helps maintain oil temperature stability under towing loads. Technicians confirm level on the dipstick after the engine reaches operating temperature to ensure the correct final fill.

• Approximate capacity: 12 quarts with filter change
• Technician verifies level after warm‑up and a short settle time
• Service includes proper disposal of used oil and filter

Dealer service provides OEM‑spec oil and filter, a documented multi‑point inspection, and factory service records, while quick‑lube shops often cost less for basic conventional services.

For the 2010 Dodge Ram Pickup 3500’s diesel engine, the dealer uses oils and filters that meet the manufacturer’s diesel specifications and documents work in the vehicle history. Quick‑lube centers can be convenient for light‑duty vehicles but may not stock diesel OEM parts or log service to factory records.

• Dealer: OEM‑spec oil/filter, multi‑point inspection, documented service
• Quick‑lube: faster turnaround, often lower price for conventional oil
• Decide based on warranty needs, towing demands, and part specifications

Failing to follow the OEM maintenance schedule and keep service records can lead to denied warranty repairs for issues tied to lack of maintenance.

Manufacturers require proof that required maintenance was performed at the recommended intervals to support warranty claims. Using certified facilities and keeping receipts or a service log helps demonstrate compliance if warranty coverage is reviewed.

• Keep dated receipts and service records for every oil change
• Factory‑specified intervals and oil types matter for coverage
• Dealership notes and inspections create a clear documented history

Full synthetic oils offer superior high‑temperature stability and shear protection for the 2010 Dodge Ram Pickup 3500’s turbo diesel compared with conventional or synthetic‑blend oils.

Conventional oils meet basic lubrication needs but break down sooner under heavy loads and high turbocharger temperatures. Synthetic blends improve protection and cold‑start flow; full synthetics maintain viscosity and protect turbochargers and piston rings longer, which is why full synthetic oils meeting OEM diesel specs are commonly used for the 6.7L engine.

• Conventional: lower cost, shorter protection window
• Synthetic blend: better cold‑start and stability than conventional
• Full synthetic: best thermal and shear stability for diesel turbo engines

An oil change for the 2010 Dodge Ram Pickup 3500 includes draining the used diesel oil, replacing the OEM‑spec filter, refilling with the correct volume of OEM‑specified diesel oil, and performing a multi‑point inspection. Technicians also top off fluids as needed and check tire pressures and lights before returning the truck.

The service steps are performed in this order: drain and replace oil, install OEM or equivalent filter, warm‑up and check level, inspect belts, hoses, and brakes, and note any items that need additional attention. All service is documented on the repair order to support maintenance history.

Warranty note: keep the service record to demonstrate compliance with manufacturer maintenance requirements; service documentation can affect warranty outcomes. View current offers before you visit via service specials, or schedule service.

The 2010 Dodge Ram Pickup 3500 with the 6.7L inline‑6 turbo diesel takes an OEM‑specified diesel engine oil that meets API CJ‑4 service categories, with a common viscosity recommendation of SAE 15W‑40 for typical Salt Lake Valley conditions. The engine’s oil capacity is approximately 12 quarts when replacing the filter; always confirm the final fill on the dipstick after the engine reaches normal operating temperature.

For severe‑duty use (frequent towing, dusty canyon roads, many short trips in cold weather), shorten oil change intervals and use oils rated for heavy‑duty diesel service. There are no dealer‑specific TSBs listed here; technicians will advise if any engine‑related service campaigns apply when you visit. Bring your 2010 Dodge Ram Pickup 3500 to Larry H. Miller Chrysler Jeep Dodge Ram Sandy in Sandy for an OEM‑spec oil change — schedule service.

We service the 2010 Dodge Ram Pickup 3500 for drivers across Sandy, Draper, and South Jordan from our Sandy Auto Mall location. The Wasatch Front climate — cold winters, dusty summer foothills, and regular towing to the canyons — affects oil choice and change frequency. Technicians consider cold‑start protection and dust ingestion when recommending oil types and intervals for the 6.7L turbo diesel.

Conveniently located at 10905 South Auto Mall Drive, just off I‑15, the service center is accessible for commuters traveling between Salt Lake City and Provo. Bring any towing history or recent service notes when you arrive so the desk can create an accurate maintenance record. To set an appointment, schedule service online or view current service specials before your visit.