2013 Chrysler 300 Oil Change

$79–$129 is a common dealer oil-change price range; contact Larry H. Miller Chrysler Jeep Dodge Ram Sandy for exact up-front pricing.

Dealership pricing includes OEM-spec oil and a factory-grade filter, with labor and a multi-point inspection performed by technicians familiar with the 2013 Chrysler 300’s 3.6L V6. Price can vary by oil type (conventional vs. full synthetic), regional taxes, and any additional services.

• Includes OEM-spec oil and filter when chosen
• Up-front pricing available at Larry H. Miller Chrysler Jeep Dodge Ram Sandy
• Check service specials for current offers

Most dealer oil changes for a 2013 Chrysler 300 are completed in about 45 minutes when scheduled.

That timeframe covers drain and fill with the proper oil, filter change, a visual inspection of belts and hoses, and a brief road-ready check. Busy periods or additional repairs can extend time; use the online schedule to reserve a service slot.

• Typical service duration: ~45 minutes
• Includes multi-point inspection and fluid top-offs
• Book a time via schedule service

Following Chrysler’s maintenance guidance, many owners change oil every 6,000 miles under normal driving; more frequent service is recommended for severe duty.

Sandy’s climate — cold winters and dusty summer conditions near the valley — can shorten service intervals if you regularly drive in stop-and-go traffic, tow, or take canyon routes. Keep a documented service record to support warranty and resale value.

• Common interval: ~6,000 miles under normal use
• Consider shorter intervals for frequent short trips, towing, or dusty conditions
• Document maintenance to help preserve warranty coverage

The 2013 Chrysler 300 with the 3.6L V6 typically uses a 5W-20 viscosity and is commonly serviced with full synthetic oil for better cold-start protection and thermal stability.

Using the OEM-recommended viscosity and quality helps maintain engine performance for the 3.6L V6, especially in Utah’s cold winters and higher-altitude driving. Dealership service uses oils that meet factory specifications and are documented on the service record.

• Typical viscosity: 5W-20 (check owner’s manual for confirmation)
• Full synthetic preferred for extended protection
• Dealer service documents oil type on the invoice

The 2013 Chrysler 300’s 3.6L V6 engine typically takes about 6.0 quarts of oil with filter change.

Exact oil capacity can vary slightly by engine variant; technicians at Larry H. Miller Chrysler Jeep Dodge Ram Sandy confirm the required volume and top to the correct level during service. Proper fill prevents overfill or low-oil conditions that can harm the 3.6L engine.

• Typical capacity: ~6.0 quarts (with filter)
• Technicians verify level on a warm engine at service
• Documented on the service invoice for warranty and resale

Dealer service provides OEM-spec parts, documented maintenance records, and factory-trained technicians, while quick-lube shops often offer lower immediate cost for basic conventional changes.

For the 2013 Chrysler 300 you’ll weigh price vs. documentation and factory conformity: dealers use oils and filters specified for the 3.6L V6 and create a service record that supports warranty claims and resale. Quick-lube centers can be convenient for basic, lower-cost visits but may not document OEM-specific choices.

• Dealer: OEM-spec oil/filter, warranty-friendly records
• Quick-lube: faster turnaround, often lower cost for conventional oil
• Choose dealer service to preserve documented history and specifications

Full synthetic oil provides superior high- and low-temperature protection for the 3.6L V6; blends offer a midpoint, and conventional oils are the basic option.

For the 2013 Chrysler 300, full synthetic improves cold-start pumpability in Sandy winters and holds stability at highway speeds, supporting the 3.6L engine’s longevity. Your dealer can recommend the oil type that matches driving patterns and the OEM viscosity requirement.

• Full synthetic: best thermal and cold-start protection
• Synthetic blend: improved protection over conventional at lower cost
• Conventional: least expensive, suited for short-interval maintenance

Failure to follow the OEM maintenance schedule and to keep service records can jeopardize warranty coverage for engine-related claims.

Warranty decisions hinge on documented maintenance and causation; if engine damage is linked to neglected oil service, a warranty claim can be denied. Keeping service invoices that show oil type, mileage, and dates is the best protection for warranty eligibility.

• Keep dated invoices and service records
• Use OEM-spec oil and documented installations when possible
• Ask service advisors about warranty documentation at Larry H. Miller Chrysler Jeep Dodge Ram Sandy

The 2013 Chrysler 300 is powered by a 3.6L (3604 cc) V6 that was offered to run on flex-fuel (unleaded/E85) in many configurations; torque is rated at 260 lb-ft and horsepower at 292 hp. For oil, the factory-recommended viscosity for this V6 is typically 5W-20, and many technicians recommend full synthetic for its cold-start and high-temperature stability. Typical oil capacity with a filter change is about 6.0 quarts; always confirm the exact fill volume on the vehicle’s oil fill cap or owner’s manual.

Service technicians use OEM-spec filters matched to the 3.6L engine and follow the factory procedure for drain and fill, torque values, and level checks. Bring your 2013 Chrysler 300 to Larry H. Miller Chrysler Jeep Dodge Ram Sandy in Sandy for an OEM-spec oil change — schedule service.

An oil change for the 2013 Chrysler 300 performed at the dealership generally includes a drain of the used oil, replacement with OEM-spec oil to the proper viscosity and volume, and installation of a factory-grade oil filter. Technicians perform a multi-point inspection that looks at belts, hoses, fluid levels, tire pressure, and warning lights; they also top off other fluids as needed and reset service indicators where applicable.

Service records are provided and help preserve documented maintenance history for warranty or resale. Review current offers before you visit on the service specials page and schedule service online.

Larry H. Miller Chrysler Jeep Dodge Ram Sandy serves the southern Salt Lake Valley from our location on 10905 South Auto Mall Drive, convenient to I‑15 and the Silicon Slopes commute corridor. We support families and commuters from Sandy, Draper, and South Jordan, where cold winter starts and dusty summer conditions make correct oil choice and documented intervals important for the 2013 Chrysler 300’s engine health.

Book an appointment online to reduce wait time and bring your service history if you want us to continue your documented maintenance. For questions about what to bring or to confirm availability, schedule service or review current offers on our service specials page.