2013 Ram 2500 Oil Change in Sandy, UT

Oil change pricing at Larry H. Miller Chrysler Jeep Dodge Ram Sandy is provided as up-front pricing at the service counter; call or check current service specials for exact rates.

We post transparent pricing at the time of service and include OEM-spec parts when you choose dealer service. Because the 2013 Ram 2500 can require specific oil grades and larger capacities for its 5.7L V8, the final price varies by oil type (conventional vs. full synthetic) and parts used.

• Ask service for current oil change pricing before booking.
• Dealer service includes OEM oil and OEM-style filter options.
• Check service specials for seasonal offers.

A typical oil change at the dealership is completed in under an hour, depending on shop queue and oil type selected.

Service times vary with workload and whether you choose conventional or full synthetic oil; the 2013 Ram 2500's larger oil capacity and filter access can add a few minutes versus smaller vehicles. Plan for a short wait or schedule an appointment to minimize time on site.

• Schedule an appointment to reduce wait: schedule service
• Full synthetic fills and disposal can add a few minutes.
• Technicians also perform a multi-point inspection during the visit.

Follow the OEM maintenance schedule in your owner's manual for recommended intervals; severe-duty use shortens the recommended interval.

City stop-and-go driving, frequent towing of the 2013 Ram 2500's 11,120 lb capacity, dusty roads, or prolonged idling (common in winter canyon trips) are considered severe-duty and generally require more frequent oil changes. Keep service records to document compliance with the OEM schedule.

• Refer to the owner's manual for the factory-recommended interval.
• Shorten intervals for towing, heavy loads, or dusty/off-road use.
• Dealer records help with warranty and resale documentation.

The 2013 Ram 2500 requires an engine oil that meets the OEM specification listed in the owner's manual; the dealer can confirm the correct viscosity and synthetic recommendation for your 5.7L V8.

Because the 5.7L V8 has specific lubrication needs under heavy-duty and towing use, the service department supplies the OEM-recommended oil grade and will recommend full synthetic when appropriate. Always use oils meeting Chrysler-specified standards to protect engine components and emissions systems.

• Service techs will confirm the correct viscosity for your engine and climate.
• Full synthetic is commonly recommended for towing or severe-duty conditions.
• Dealer-installed OEM-style filters are used to maintain warranty compliance.

The 2013 Ram 2500 requires the engine oil capacity specified in the owner's manual; exact quarts vary by engine and filter choice and will be confirmed by service technicians.

Because capacities can differ based on whether the oil filter is changed and which oil brand is used, dealer service confirms the correct fill level and uses OEM-fill procedures. Proper fill minimizes oil pressure issues and keeps the 5.7L V8 operating within factory tolerances.

• Service confirms capacity and fills to the factory-specified level.
• Technicians check oil level on a cold start or as specified by the manufacturer.
• Overfill and underfill are avoided with dealer procedures and checks.

Dealer service includes OEM-spec oil and OEM-style filters plus a factory-aligned multi-point inspection and service records, which quick-lube shops may not provide.

Quick-lube shops are often faster and may offer lower up-front prices for conventional oil, but dealer service ensures the correct oil grade for the 5.7L V8 and documents maintenance on the vehicle's service history. For owners who tow or operate in severe conditions around Sandy, UT, dealer records can simplify warranty or resale questions.

• Dealer: OEM-spec oil/filter, multi-point inspection, service records.
• Quick-lube: faster turnaround, sometimes lower cost for conventional oil.
• Choose dealer service to maintain documented OEM maintenance history.

Failure to follow the OEM maintenance schedule and to keep service records can jeopardize warranty coverage for engine-related claims.

Warranty work typically requires proof of proper maintenance per the manufacturer's schedule; dealer service records are accepted documentation. Skipping recommended oil changes or using non‑specified oil can complicate warranty evaluations for engine or emissions failures.

• Keep dated service invoices as proof of maintenance.
• Dealer service entries are accepted for warranty validation.
• If in doubt, ask service staff to note maintenance aligned with OEM intervals.

Full synthetic provides superior high-temperature protection and oxidation resistance compared with conventional or synthetic-blend oils and is often recommended for towing and severe-duty driving.

For the 2013 Ram 2500's 5.7L V8, high-load conditions like towing and mountain driving near the Wasatch Range increase oil stress; full synthetic helps maintain viscosity and film strength. Synthetic blends offer a middle ground, and conventional oil is generally acceptable only if aligned with the OEM recommendation and service interval.

• Full synthetic: best thermal stability and longevity under load.
• Synthetic blend: improved protection over conventional at lower cost.
• Conventional: acceptable only if it meets OEM specs and interval needs.

The 2013 Ram 2500 visits our service center regularly for maintenance because its 5.7L V8 and heavy-duty capability respond to correct lubrication and inspection. Serving Sandy, Draper, and South Jordan from the Sandy Auto Mall, we see vehicles used for Silicon Slopes commutes, family trips to The Shops at South Town, and weekend canyon towing. Local seasonal extremes — cold winters and dusty summer roads — can increase the importance of correct oil selection and interval adjustments.

Our technicians follow factory procedures when performing oil changes and inspections on the 2013 Ram 2500, confirming oil grade, fill level, and complementary fluid checks. To avoid wait times, schedule service or call the service department for directions and availability.

An oil change for the 2013 Ram 2500 includes draining old oil, replacing the oil filter with an OEM-style filter, and refilling with the oil grade specified for the vehicle. Technicians perform a multi-point inspection, check and top off fluids, and verify tire pressures to factory recommendations. All work is recorded on the service invoice to document maintenance history for warranty or resale needs.

To book an oil change, schedule service or ask the service desk about current offers on service specials. For directions or questions, call the service department to confirm availability and any needed parts.

For the 2013 Ram 2500 with the 5.7L V8, use the oil viscosity and specification recommended in the owner's manual to protect engine components and emissions systems; the dealer will confirm the correct oil grade during service. Proper capacity and filter choice matter for the 2013 Ram 2500's engine, and service techs fill to the factory-specified level and verify via dipstick or electronic level procedure.

Severe-duty conditions — frequent towing, dusty roads, or extended idling common to local canyon access — warrant attention to interval adjustments and possibly switching to full synthetic. Bring your 2013 Ram 2500 to Larry H. Miller Chrysler Jeep Dodge Ram Sandy in Sandy for an OEM-spec oil change — schedule service.