2015 Ram 2500 Oil Change in Sandy, UT

Typical dealer oil-change pricing for a 2015 Ram 2500 runs $89–$149 at Larry H. Miller Chrysler Jeep Dodge Ram Sandy.

That range reflects oil type and filter selection plus labor; LHM Sandy provides up-front pricing and documents what’s included. For heavy-duty usage such as towing or canyon driving around the Wasatch Front, higher-grade oil or an extended service may be recommended. You can view current offers on our service specials.

• Price shown covers standard oil and filter change
• Higher-grade or extra-capacity services may cost more
• Up-front estimate provided before work begins

An oil change for a 2015 Ram 2500 at our dealership is scheduled for about 60 minutes from check-in to completion.

That window covers draining and refilling, installing an OEM-spec filter, and a multi-point inspection that identifies local issues from winter cold starts to canyon dust. During busy seasonal periods (balloon festivals, holidays) allow additional time or use our online option to schedule service.

• Labor and inspection included in the time estimate
• Allow extra time if additional services are identified
• Online scheduling helps reduce wait time

Follow the manufacturer’s recommended interval in your owner’s manual; many Ram owners change oil every 5,000–7,500 miles depending on use.

Severe-duty conditions common to the Salt Lake Valley — frequent towing, dusty canyon roads, or many short cold-start trips in winter — justify the shorter end of the interval. Keep service records to document maintenance history for warranty and resale value.

• Reduce interval for frequent towing or heavy loads
• Shorten interval for repeated short trips and cold weather
• Maintain written records of each oil change

The 2015 Ram 2500 should be serviced with the OEM-recommended oil grade and specification listed in the owner’s manual; many 6.4L V8 engines use a full-synthetic oil formulation.

Using the recommended oil preserves engine performance for the 6.4L V8 and supports emission systems and longevity under towing duties up to 10,000 lb. Our technicians use factory-equivalent oils and filters to meet the OEM specifications documented for your vehicle.

• OEM-spec full synthetic is commonly recommended for the 6.4L V8
• Manufacturer viscosity and spec are listed in the owner’s manual
• We use factory-equivalent filters during service

The 2015 Ram 2500 with the 6.4L V8 typically requires about 8 quarts of engine oil (filter included).

Accurate capacity depends on the exact engine and whether the oil filter is changed; our technicians confirm capacity during service and top to the correct level. Proper fill helps maintain oil pressure and cooling when towing or driving in cold Salt Lake Valley winters.

• Approximately 8 quarts for the 6.4L V8 (filter changed)
• Technician verifies level on the dipstick after warm-up
• Overfilling or underfilling can affect performance and longevity

Dealer service provides OEM-spec oil and filter, factory-trained technicians, and a documented multi-point inspection that many quick‑lube shops do not include.

Quick‑lube shops can be convenient and sometimes cheaper for basic conventional oil changes; however, dealership service focuses on OEM parts and service records that support warranty and long-term maintenance. Choose based on your priorities: lowest immediate cost versus documented OEM care.

• Dealer: OEM-spec oil/filter, multi-point inspection, recorded service history
• Quick-lube: faster drop-in service, sometimes lower price for basic services
• Documented service at the dealer helps with warranty and resale

Failure to follow the manufacturer’s maintenance schedule can jeopardize warranty coverage for engine-related claims; documented maintenance is required to demonstrate compliance.

Warranty coverage depends on following the owner’s manual intervals and keeping records of services performed. If a warranty claim is submitted, the manufacturer may request proof that recommended services were completed, so retain receipts and service records.

• Keep written records of every oil change and inspection
• Use OEM-spec parts and documented procedures when possible
• Dealer service provides clear documentation for warranty support

Conventional oil is refined crude oil, synthetic blend mixes base oils for improved performance, and full synthetic provides the highest thermal stability and wear protection for the 6.4L V8.

For heavy-duty use — towing, mountain passes, or frequent cold starts in the Salt Lake Valley — full synthetic offers better protection against breakdown and cold-flow limitations. Review the owner’s manual and service advisor recommendations when selecting oil for your 2015 Ram 2500.

• Conventional: lower cost, adequate for light-duty, shorter change intervals
• Synthetic blend: compromise of cost and protection
• Full synthetic: best thermal stability and wear protection for heavy use

The 2015 Ram 2500 is built for towing and heavy duty work, and local conditions around Sandy — frequent canyon trips, winter cold starts, and dusty roads — affect oil life and engine wear. Our service center in the Sandy Auto Mall serves Sandy, Draper, and South Jordan residents and commuters on I‑15 who rely on consistent maintenance. We inspect cooling, belts, brakes, and fluids during an oil service to spot issues that matter on mountain drives and during heavy towing.

Technicians follow manufacturer procedures for the 6.4L V8 and verify levels after warm‑up. To reduce wait times, schedule service online and check current savings on service specials. Directions: we’re at 10905 South Auto Mall Drive in Sandy, minutes from America First Field and the Shops at South Town.

A standard oil change for the 2015 Ram 2500 includes draining the old oil, installing an OEM-equivalent filter, and filling the correct quantity of oil. Technicians perform a multi-point inspection, check fluid levels, and verify tire pressure and lights. Any recommended follow-up is documented and communicated before additional work begins.

We record service history for warranty and resale purposes and provide an itemized invoice showing parts and labor. If additional repairs are needed, our service advisors explain options and estimated times. To book an appointment, schedule service.

The 2015 Ram 2500 with the 6.4L V8 calls for an OEM-recommended oil type and viscosity as listed in your owner’s manual; for that engine family, technicians commonly service with a full-synthetic oil and the correct manufacturer viscosity. The engine’s oil capacity is approximately 8 quarts with filter change, and using the recommended oil helps maintain the 410 horsepower output and the truck’s towing integrity.

Common engine-related issues tied to oil service include ensuring proper oil level after towing and monitoring for leaks at gaskets as the vehicle ages. Bring your 2015 Ram 2500 to Larry H. Miller Chrysler Jeep Dodge Ram Sandy in Sandy for an OEM-spec oil change — schedule service.