2016 Chrysler 300 Oil Change in Sandy, UT

$79 - $129 is the typical oil change range at Larry H. Miller Chrysler Jeep Dodge Ram Sandy.

That price range reflects dealer service that includes OEM-spec oil and filter plus a written estimate up-front. Pricing varies by oil type used (conventional vs. full synthetic) and any additional services identified during a multi-point inspection.

• Includes OEM-spec oil and filter where required
• Written, up-front pricing from LHM Sandy Jeep
• Additional repairs or fluid services priced separately

Most oil changes for the 2016 Chrysler 300 at our service center take about 45 minutes to complete.

That timeframe covers draining the oil, replacing the OEM filter, refilling with the recommended oil and performing a multi-point inspection. Time can extend if additional maintenance or repairs are identified during inspection.

• Drain and refill with OEM-spec oil
• OEM filter replacement and leak check
• Multi-point inspection and fluid top-offs

Follow the manufacturer’s recommended oil interval listed in your owner’s manual; many owners follow a 6,000–7,500 mile schedule for regular driving and shorten that for severe conditions.

Severe-duty conditions common to the Salt Lake Valley—frequent short trips, heavy idling during commute, and cold winters—can increase oil degradation and warrant more frequent changes. Keep digital or stamped service records to support warranty and resale value.

• Narrow interval for cold-start heavy duty and canyon driving
• Record service visits at LHM Sandy Jeep to document compliance
• Check oil level between services, especially in winter

The 2016 Chrysler 300 with the 3.6L V6 generally requires an OEM-recommended viscosity and oil meeting Chrysler specifications (commonly a full synthetic formulation).

Using the OEM-recommended oil helps maintain engine performance, fuel economy, and emissions control. Our technicians confirm the correct viscosity and spec before filling to match engine code and local climate needs.

• Technicians verify OEM viscosity for your engine code
• Full synthetic often recommended for durability and cold flow
• Service records note the exact oil and filter used

The 2016 Chrysler 300’s 3.6L V6 engine requires the engine’s specified oil capacity as listed in the owner’s manual.

Exact quarts vary by engine configuration and whether the oil filter is included in the fill specification; our technicians use the factory service specification and top off to the correct level during every service.

• Fill according to factory capacity and filter change spec
• Technician checks level warm and on level ground
• Record kept of exact quarts added at LHM Sandy Jeep

Dealer oil changes provide OEM-spec oil and filters plus a factory-trained multi-point inspection and documented service history, which many quick-lube locations do not include.

Quick-lube shops can be convenient and sometimes less expensive for basic conventional oil changes, but dealer service focuses on factory parts, software updates, and detailed records that help protect warranty and resale. Choose based on your priorities for cost, documentation and OEM conformity.

• Dealer: OEM parts, written service records, factory procedures
• Quick-lube: faster turnaround, lower cost for basic services
• Pick dealer service when warranty documentation or OEM parts matter

Failing to follow the manufacturer’s maintenance schedule and document service can jeopardize warranty claims; keeping records of oil changes is required to support warranty repairs.

Warranty coverage typically hinges on proof that required maintenance was performed per the owner’s manual; dealer service records from LHM Sandy Jeep are accepted documentation. If a failure is linked to neglected maintenance, warranty coverage may be denied.

• Keep receipts or dealer service logs to document compliance
• Dealer-performed service uses OEM procedures that align with warranty rules
• Ask service advisors about what records to retain for warranty claims

Conventional oil is petroleum-based, a synthetic blend mixes conventional and synthetic base stocks, and full synthetic uses engineered base oils for better high- and low-temperature performance.

Full synthetic oils offer improved cold-start flow and thermal stability, which can be beneficial for the 3.6L V6 during cold Utah winters and high-temperature driving. Your owner’s manual lists the recommended oil type, and our technicians use that spec when servicing the 2016 Chrysler 300.

• Full synthetic: better thermal stability and cold-flow
• Synthetic blend: intermediate performance at lower cost
• Conventional: lowest cost, suitable only where manufacturer allows

The 2016 Chrysler 300 is a large-car platform commonly used for daily commuting and family trips across the Salt Lake Valley. Our service center at 10905 South Auto Mall Drive serves Sandy, Draper, and South Jordan drivers who face cold winters, canyon driving, and stop-and-go Silicon Slopes commutes. Those conditions can stress oil performance—cold starts reduce lubricant flow and dusty, stop-and-go driving raises contamination levels.

Technicians at Larry H. Miller Chrysler Jeep Dodge Ram Sandy confirm the correct oil viscosity and replace the OEM filter, perform a visual inspection, and log the service into your vehicle history. We document work to help maintain warranty compliance. To schedule a factory-spec oil change, schedule service or check current offers on service specials.

An oil change for the 2016 Chrysler 300 includes draining old oil, installing an OEM-equivalent filter, refilling with the factory-recommended oil type and viscosity, and performing a multi-point inspection. The service process verifies oil level and filter seating, checks for leaks, and inspects belts, hoses, brakes, and tires for obvious concerns.

Technicians document the oil weight and quarts used in your service record. Warranty-related terms that apply to oil changes follow the manufacturer’s maintenance requirements and are recorded in your vehicle’s service history. To make an appointment, schedule service.

For accurate oil selection, the 2016 Chrysler 300’s 3.6L V6 requires the factory-recommended viscosity and oil meeting Chrysler specifications; the exact oil capacity and viscosity are listed in the owner’s manual and factory service information. Using the specified oil supports proper valve timing chain lubrication, emissions controls, and long-term engine durability.

Technicians use the OEM filter part number and the factory fill capacity (including filter) when topping off. If you have questions about technical service bulletins or common engine oil concerns for the 2016 Chrysler 300, our service advisors can review your vehicle’s maintenance history and any known issues during your visit. Bring your 2016 Chrysler 300 to Larry H. Miller Chrysler Jeep Dodge Ram Sandy in Sandy for an OEM-spec oil change — schedule service.