2016 Ram Promaster City Air Filter

The engine air filter is located in the engine bay inside the vehicle's air intake housing (airbox).

On the 2016 Ram Promaster City the filter sits in an enclosed plastic airbox near the front of the engine compartment. It is designed for straightforward removal on most service bays, but access can vary slightly by model year and local aftermarket modifications. At our Sandy service center technicians inspect the housing seal when replacing the filter to prevent unfiltered air from reaching the intake.

• Location: engine bay, inside the air intake box (airbox)
• Tech check: airbox clips or screws are verified for proper sealing
• Tip: avoid compressed-air cleaning if the filter is damaged — replace instead

The engine air filter cleans intake air for combustion, while the cabin air filter cleans air entering the vehicle's HVAC system for passengers.

For the 2016 Ram Promaster City the engine filter protects the engine and fuel system from dust and debris, affecting power and efficiency. The cabin filter reduces pollen, dust, and particulates that reach occupants through heating and air conditioning. Both filters are important for different systems and should be checked separately during routine service in Sandy.

• Engine filter: protects engine components and MAF sensor
• Cabin filter: improves HVAC airflow and passenger air quality
• Service note: technicians inspect both systems during a filter service

Common signs include reduced engine power, lower fuel economy, rough idling for the engine filter, and weak HVAC airflow or musty smells for the cabin filter.

If you notice slower acceleration or a drop in MPG in your 2016 Ram Promaster City, the engine air filter can be a contributing cause. Inside the cabin, reduced fan performance or persistent odors during heating/cooling often point to a clogged cabin filter. Our Sandy technicians will identify which filter is responsible and recommend replacement if needed.

• Engine symptoms: reduced acceleration, poor fuel economy, rough idle
• Cabin symptoms: weak HVAC airflow, musty or dusty odors, visible debris
• Local factor: Sandy’s seasonal pollen and valley dust can accelerate clogging

You can often replace the engine air filter yourself, while the cabin filter may require glove-box removal and is commonly handled by a technician.

Many owners of the 2016 Ram Promaster City find the engine air filter is accessible with basic tools and a short bit of time. The cabin filter typically needs a little interior trim removal to access; if you prefer a full inspection of the intake housing and a MAF visual check, scheduling service at our Sandy shop adds that layer of diagnostic confidence.

• DIY engine filter: basic tools, follow owner’s manual steps
• Cabin filter: may require glove-box or trim removal
• Dealer benefit: OEM-spec parts, intake/MAF visual inspection, documented work — schedule service

Yes — we install Mopar OEM-spec filters for Ram vehicles when OEM parts are requested or required.

Mopar is the OEM parts brand for Chrysler, Dodge, Jeep and Ram vehicles; using these parts preserves factory fit and filtration standards for the 2016 Ram Promaster City. Our service teams in Sandy document parts used during the job so owners know whether an OEM or aftermarket filter was installed.

• Mopar OEM-spec filters available for Ram applications
• Installation includes inspection of housing seals and intake connections
• Ask your technician for parts documentation after service

The cabin air filter is located behind the glove box and is accessible after glove-box or trim removal.

Accessing the 2016 Ram Promaster City cabin filter typically requires lowering the glove box and releasing a few clips; some models include a service panel for easier removal. In Sandy’s seasonal climate, we often recommend inspecting the cabin filter when you notice reduced HVAC airflow or during pollen season.

• Location: behind the glove box or inside a lower HVAC access panel
• Replacement tip: protect interior trim to avoid scuffs when removing the glove box
• Local note: Sandy-area pollen and road dust can clog the cabin filter faster

The service includes four core steps: engine filter replacement, cabin filter replacement, intake housing check, and a visual MAF sensor inspection.

For the 2016 Ram Promaster City our technicians follow a documented procedure: remove and replace the designated filter(s) with OEM-spec or approved parts, check the airbox and intake seals for damage, and perform a visual inspection of the mass airflow sensor and intake components. We report findings and recommend follow-up if additional repairs are needed.

• Step 1: remove and replace engine air filter if needed
• Step 2: remove and replace cabin air filter if required
• Step 3: intake housing and MAF visual inspection plus documentation

Inspect both engine and cabin filters at every scheduled oil change or at least once per year.

Because Sandy sits in a valley with seasonal pollen and periodic road dust, inspecting air filters during routine oil service helps catch accelerated clogging before it affects performance or cabin air quality. If you frequently drive dirt roads or spend time near canyon construction, consider earlier inspections. Our technicians will note filter condition in your service record.

• Routine check: with every oil change or annually
• Consider sooner if you drive dusty roads or during high-pollen seasons
• Inspection documented on the service order for future reference

The 2016 Ram Promaster City benefits from filter attention tuned to the Salt Lake Valley climate. Serving Sandy, Draper, and South Jordan, our Sandy Auto Mall location sees filters affected by valley dust, seasonal pollen, and commuter road conditions on I-15. Those conditions can shorten filter life compared with low-dust regions; technicians routinely find higher debris loading after summer roadwork and spring pollen bursts. If you use your Promaster City for Silicon Slopes commuting or weekend canyon trips, frequent inspection preserves fuel economy and HVAC performance.

Our service center is positioned for convenient access from 10905 South Auto Mall Drive; if you need a planned visit, schedule service online. We also publish rotating maintenance offers—see service specials before you come.

The air filter replacement for a 2016 Ram Promaster City follows a step-by-step process: inspection of both engine and cabin filters, removal and installation of OEM-spec or approved replacement filters, intake housing and seal verification, and a visual check of the mass airflow sensor. Technicians document parts installed and any observations such as damaged seals or excessive debris. This ensures the engine breathes clean air and passengers receive improved HVAC airflow.

After service you receive a written record of the parts used; if you prefer Mopar OEM-spec filters we can install them and note that on your service order. To book, schedule service online or review current service specials.

For the 2016 Ram Promaster City both an engine air filter and a cabin air filter are serviceable components that affect performance and comfort. Exact OEM part numbers and recommended replacement intervals are listed in the vehicle owner's manual; if you do not have the manual available our technicians will look up factory specifications during appointment intake. Common service callouts include intake seal inspection and MAF sensor visual checks to ensure the replacement filter performs as intended.

Bring your 2016 Ram Promaster City to Larry H. Miller Chrysler Jeep Dodge Ram Sandy in Sandy for OEM-spec filter service — schedule service.