2017 Chrysler 200 Oil Change

The typical dealer oil change price ranges from $79 to $129 at Larry H. Miller Chrysler Jeep Dodge Ram Sandy.

We provide up-front pricing and list what’s included so Sandy drivers know the value before arrival. Dealer service typically uses OEM-spec oil and filters and documents the work for your vehicle records.

• Price range: $79–$129 (dealer range)
• Includes OEM-spec oil and filter where applicable
• Up-front pricing and service documentation

An oil change for the 2017 Chrysler 200 typically takes about 60 minutes at a dealership service drive.

Timing varies with shop load and added services, but plan for roughly an hour when scheduling. LHM Sandy Jeep can often accommodate same-day appointments; use the online scheduler for faster check-in.

• Plan: ≈60 minutes for a standard oil change
• Same-day appointments possible depending on availability
• Schedule online to reduce wait time: schedule service

Follow the OEM recommended maintenance interval; many owners use service intervals around 6,000 miles for normal driving conditions.

Severe-duty conditions common around Sandy—frequent short trips, canyon driving, cold winters—can increase engine wear and may justify shorter intervals. Keep service records to document maintenance for future warranty or resale needs.

• Typical service interval commonly around 6,000 miles for many owners
• Shorter intervals for severe duty (cold starts, lots of idling, towing)
• Keep written service records for warranty and resale

The 2017 Chrysler 200 with the 3.6L V6 typically uses a full-synthetic 5W-20 OEM-spec oil.

Using the OEM-recommended viscosity and quality helps preserve engine performance and aligns with manufacturer service guidelines. LHM Sandy Jeep stocks OEM-grade oils and can confirm the correct specification for your vehicle at service check-in.

• Recommended: full-synthetic, 5W-20 (confirm at service)
• OEM-spec oils maintained on dealer service records
• Dealer techs verify specification as part of check-in

The 3.6L V6 in the 2017 Chrysler 200 requires roughly 6.0 quarts of engine oil with a filter change.

Exact capacity can vary slightly with filter choice and oil brand; technicians at LHM Sandy Jeep top off to the proper level and check the dipstick to ensure accuracy. Accurate fill prevents overfilling and protects the engine during highway and canyon driving near Sandy.

• Approximate capacity: 6.0 quarts with filter
• Technician verifies level with dipstick after fill
• Top-offs and disposal included with service

Dealer service includes OEM-spec oil/filter, documented maintenance records, and a multi-point inspection that quick-lube shops may not provide.

Quick-lube shops can be faster and sometimes less expensive for basic oil changes, but dealer service documents work on factory maintenance records and uses OEM parts. For owners near Sandy who keep factory maintenance for warranty or resale, dealer documentation is often valuable.

• Dealer: OEM parts, documented records, multi-point inspection
• Quick-lube: faster, sometimes lower upfront cost for basic services
• Choose based on cost, convenience, and need for factory documentation

Failing to follow scheduled oil changes and to keep maintenance records can jeopardize warranty coverage for affected components.

Warranty considerations rely on documented maintenance that follows OEM intervals and specs. Having dealer service records from LHM Sandy Jeep strengthens claims and shows compliance with manufacturer requirements.

• Maintain records proving oil changes followed OEM specs
• Dealer service entries help document compliance for warranty
• Ask service advisors about required documentation when scheduling

Full synthetic oil offers better high- and low-temperature protection and longer life than conventional or blend oils for the 2017 Chrysler 200's 3.6L V6.

Full synthetic resists breakdown in canyon driving and cold Utah winters and helps maintain viscosity on highway commutes. If the OEM recommends full synthetic, choose that grade to match manufacturer guidance and service records.

• Full synthetic: best thermal stability and longer drain life
• Synthetic blend: intermediate protection and cost
• Conventional: lowest cost, more frequent changes required

The 2017 Chrysler 200 with the 3.6L V6 calls for an OEM-grade full-synthetic oil in the 5W-20 viscosity range and requires approximately 6.0 quarts at an oil and filter change. Using the recommended specification preserves engine performance across Sandy’s seasonal extremes—from cold winter starts to warm summer canyon drives—while helping maintain factory service records. Technician checks include a cold-start inspection, filter seating verification, and a final dipstick level check. Bring your 2017 Chrysler 200 to Larry H. Miller Chrysler Jeep Dodge Ram Sandy in Sandy for an OEM-spec oil change — schedule service.

Our service drive serves Sandy, Draper, South Jordan and the broader southern Salt Lake Valley neighborhoods, and we understand local driving patterns—short commutes, canyon trips, and winter cold-start demands. LHM Sandy Jeep technicians follow factory procedures when servicing a 2017 Chrysler 200, documenting each oil change on the vehicle’s service record. We’re located in the Sandy Auto Mall near I-15 at 10905 South Auto Mall Drive, convenient for commuters on the Wasatch Front. For appointment availability and to limit wait times, schedule an appointment or review current savings under service specials.

A standard oil change for the 2017 Chrysler 200 includes draining the old oil, replacing the engine oil filter, filling with the OEM-recommended full-synthetic 5W-20 oil to the correct level, and performing a multi-point inspection. Technicians top off other fluids as needed, check tire pressure, and note any recommended follow-up repairs. Service entries are recorded in the vehicle file to support warranty and resale. For transparent pricing and to see if current offers apply, view service specials or schedule service. Call the service drive to confirm details and appointment times.