2017 Dodge Journey Air Filter in Sandy, UT

The engine air filter on the 2017 Dodge Journey sits in an airbox in the engine bay, accessible from the front-left area under the hood.

On the 2017 Dodge Journey with a 3.6L V6, the airbox is secured with clips or screws and feeds the intake tract that leads to the throttle body and intake manifold. Technicians inspect the housing seal and intake snorkel for cracks or loose fittings during replacement to protect the 283-horsepower engine from unfiltered air and debris.

• Located in the engine bay, front-left side under the hood
• Secured by clips or fasteners; housing removed for filter access
• Technician checks intake seals and snorkel during service

The cabin air filter on the 2017 Dodge Journey is typically located behind the glove box inside the passenger compartment.

Access usually requires lowering or removing the glove box to reach the HVAC filter housing. Our technicians examine the cabin filter for pollen, dust, and road debris that are common in the Sandy, UT area, and ensure the HVAC housing and drain channels are clear to prevent musty odors and moisture buildup.

• Found behind the glove box in the passenger compartment
• Glove box removal or lowering is often required for access
• Techs check HVAC housing and drain for obstructions

The engine air filter protects the 3.6L V6 intake system and combustion, while the cabin air filter protects passengers and HVAC components from outside air contaminants.

The engine filter prevents dust and debris from entering the intake and damaging sensors or reducing power; the cabin filter traps pollen, road dust, and exhaust particulates before air reaches the passenger cabin. Both play distinct roles: one preserves engine performance and fuel economy, the other maintains HVAC airflow quality and occupant comfort.

• Engine filter: guards intake, MAF sensor, and combustion system
• Cabin filter: filters pollen, dust, and vehicle exhaust particulates
• Both should be inspected regularly given Utah’s dust and pollen seasons

Common signs include reduced engine power, lower fuel economy, rough idle, weak HVAC airflow, or a musty smell in the cabin.

For the 2017 Dodge Journey’s 3.6L engine, a clogged engine filter can limit airflow to the intake, which may reduce responsiveness and efficiency. A clogged cabin filter restricts HVAC airflow and can cause odors; in Sandy’s dusty conditions, complaints about reduced airflow and increased dust inside the cabin are frequent reasons owners bring Journeys in for inspection.

• Engine: reduced throttle response or lower MPG
• Cabin: weak blower airflow or noticeable musty/earthy odors
• Visible heavy debris or oil/dirt on the filter surface

You can replace the engine air filter yourself in many cases, while the cabin filter may require more trim removal; LHM Sandy Jeep provides inspection and OEM-spec replacement if you prefer dealer service.

DIY replacement of the engine filter is often straightforward—open the airbox, swap the element, and reseal. Cabin filters require glove box access and careful handling of HVAC seals. Our technicians add value with intake and MAF visual checks, proper disposal, and documentation so you know whether additional service is needed.

• Engine filter: often DIY-friendly with basic tools
• Cabin filter: glove-box removal may be necessary
• Dealer service includes intake/MAF inspection and documentation

Have the engine air filter inspected at regular service visits or every oil change to account for local driving conditions.

For the 2017 Dodge Journey operating in the Sandy, Draper, and South Jordan corridor, dust, canyon drives, and commuter road grit can accelerate filter loading. Inspecting the engine air filter at each service visit ensures timely replacement when debris or oil contamination is present, protecting the 3.6L V6’s intake and sensors.

• Inspect at every oil change or regular service visit
• Increase inspection frequency during dusty seasons or off-road use
• Technicians document condition and recommend replacement as needed

Replace or inspect the cabin air filter annually or whenever you notice reduced HVAC airflow or odors in Sandy’s seasonal pollen and dusty conditions.

Sandy experiences high pollen in spring and elevated road dust at other times of year; those factors increase cabin filter loading. For the 2017 Dodge Journey, a yearly check—or sooner if you drive canyon roads or dusty routes—helps maintain interior air quality and HVAC performance.

• Inspect annually or sooner if airflow or odors occur
• Replace before peak pollen season for best cabin air quality
• Technician inspects housing and drainage when changing the filter

The 2017 Dodge Journey is a family-focused SUV with a 3.6L V6, 283 horsepower, and a reputation for versatile hauling. In Sandy, Utah, local factors like seasonal pollen, valley dust, and canyon commutes increase the rate at which both engine and cabin filters load. We serve neighborhoods across the southern Salt Lake Valley including Sandy, Draper, and South Jordan; customers often stop by after freeway commutes on I-15 or before canyon trips to ensure clean intake and HVAC operation. Our service staff documents filter condition and recommends replacements based on observed contamination and driving patterns. For routine bookings, schedule service or check available offers on our service specials. End with directions or contact at the Sandy Auto Mall service center.

Our air filter replacement process for the 2017 Dodge Journey covers inspection and replacement of both the engine intake filter and the cabin HVAC filter. Technicians remove the airbox cover to inspect the element, check the intake snorkel and seals, and perform a visual check of the mass airflow (MAF) sensor for contamination. For the cabin side, the glove box area is accessed, the filter element is inspected and replaced if necessary, and HVAC drains and seals are verified. The service record notes observations so you have a clear maintenance history for your Journey. If you want to book service, schedule service.

The 2017 Dodge Journey with the 3.6L V6 uses an engine air filter element sized and specified for the OEM intake system; the cabin filter fits the HVAC housing behind the glove box. Engine specifications to note during service include the 3.6L displacement, 283 horsepower at 6,350 rpm, and 260 lb-ft of torque at 4,400 rpm — maintaining clean intake air helps protect these components and supports the vehicle’s towing capacity and fuel economy. Common issues we watch for are heavy dust loading from valley roads and pollen accumulation that reduces HVAC airflow. Bring your 2017 Dodge Journey to Larry H. Miller Chrysler Jeep Dodge Ram Sandy in Sandy for OEM-spec filter service — schedule service.