2017 Ram 1500 Alignment

Larry H. Miller Chrysler Jeep Dodge Ram Sandy posts up-front alignment pricing—contact the service center for the exact cost for a 2017 Ram 1500.

We provide transparent pricing and will confirm any recommended suspension repairs before proceeding. Because road conditions in Sandy and nearby Draper can increase inspection findings, we review tie rods, ball joints, and steering components during your appointment.

• Up-front estimate provided before work begins
• Includes alignment inspection and before/after printout
• Ask about current service specials

Alignment duration varies by inspection findings and additional repairs; the service center will give a time estimate when you schedule.

Initial checks identify worn components that can extend total time. In Sandy, winter freeze‑thaw cycles and summer road repairs sometimes reveal suspension wear that requires parts replacement before final alignment.

• Inspection of suspension and steering components first
• Adjustment to factory specs once components are verified
• Technician gives a time estimate when you schedule service

General guidance: perform an alignment every 2–3 years or around 30,000 miles, and after suspension work or a major pothole impact.

Sandy roads, canyon commutes, and seasonal freeze-thaw cycles increase the chance of wheel misalignment. If you regularly tow or carry heavy loads, check alignment more frequently to prevent uneven tire wear on your 2017 Ram 1500.

• Schedule after new tires or suspension repairs
• Check after hitting a large pothole or curb
• Monitor tire wear patterns between service visits

Common signs include uneven tire wear, the truck pulling to one side, an off-center steering wheel, or vibration at speed.

Drivers around Sandy and South Jordan often notice these symptoms after hitting construction zones or rougher canyon on‑ramps. If you see feathering or cupping on tire tread, bring your 2017 Ram 1500 in for a suspension inspection and alignment check.

• Uneven or accelerated tire wear
• Vehicle pulls left or right while driving
• Steering wheel is not centered when driving straight

A four-wheel alignment includes inspection of suspension and steering, caster/camber/toe measurements, adjustment to factory specifications, and a printed before-and-after report.

Our process follows factory alignment steps: we inspect tie rods, ball joints, and shocks for play, set tire pressures, use OEM-capable alignment equipment to correct toe/camber/caster, then complete a road test. This is the same workflow recommended for trucks used on Wasatch Front roads.

• Tie-rod and suspension component inspection
• Measurement and adjustment of caster, camber, and toe to factory spec
• Before-and-after alignment printout and road test

If steering components (tie rods, ball joints, wheel bearings) show wear or excessive play, alignment alone won’t hold and additional repairs are required.

Technicians in Sandy inspect suspension parts before making adjustments. If worn components are found, we’ll explain needed repairs and how they affect steering and tire life on your 2017 Ram 1500.

• Inspection will reveal worn tie rods or ball joints
• Worn parts require repair before final alignment
• Technician provides repair estimate and revised time frame

The four-wheel alignment for the 2017 Ram 1500 follows a step-by-step, factory-oriented workflow. We begin with a suspension and steering inspection, checking tie rods, ball joints, control-arm bushings, and shocks for play or damage. Tire pressures and condition are recorded. Next, technicians measure caster, camber, and toe on all wheels with alignment rack hardware capable of factory tolerances, then make adjustments to restore factory settings. We complete a calibrated road test and provide a printed before-and-after alignment report so you can see the corrections made.

Warranty coverage for alignment work is handled according to Larry H. Miller Chrysler Jeep Dodge Ram Sandy’s terms; if you have questions about coverage, ask the advisor at drop-off. To set an appointment, schedule service and review current service specials.

Factory alignment settings for caster, camber, and toe are specific to the vehicle’s suspension, axle, and trim; technicians set each parameter on the 2017 Ram 1500 to the factory target ranges shown on OEM specifications. We use alignment equipment calibrated to dealer standards to reproduce factory readings, then adjust front and rear toe, camber, and caster as required. Common local callouts include misalignment after hitting potholes or roadside curbs, which can alter toe and camber and accelerate tire wear.

Because exact numeric specs vary by axle and option, our team confirms the factory targets during inspection and records them on your before/after printout. Bring your 2017 Ram 1500 to Larry H. Miller Chrysler Jeep Dodge Ram Sandy in Sandy for a factory-spec alignment — schedule service.

We serve Sandy and the surrounding neighborhoods of Draper and South Jordan, where canyon roads and Valley construction can quickly knock a truck out of alignment. Our service center at 10905 South Auto Mall Drive works with drivers who commute along I‑15, travel to Silicon Slopes, or tow and haul for weekend recreation. The local climate—freeze-thaw cycles and summer road work—means alignments and suspension inspections are common maintenance items for area drivers.

When you schedule an alignment, tell us if you tow, carry heavy payloads, or have recently hit a pothole so the technician can plan the inspection accordingly. To make an appointment, schedule service or check current service specials.