2017 Ram 3500 Oil Change

At Larry H. Miller Chrysler Jeep Dodge Ram Sandy, typical oil changes for a 2017 Ram 3500 range between $89 and $149.

That range reflects OEM-spec full-synthetic service for the 5.7L V8 and includes parts and labor variations depending on filter choice and current promotions. We post up‑front pricing and can apply any active service specials; see the service specials page before you book.

• OEM full-synthetic oil and Mopar-style filter options included in higher-tier pricing
• Price varies if additional fluids or repairs are identified during the multi-point inspection
• Check online service specials for current discounts

A typical oil change for a 2017 Ram 3500 at our dealership takes about 60 minutes.

This estimate covers draining old oil, replacing the OEM-style filter, topping fluids, and performing a multi-point inspection; complex findings can extend time. Busy periods or required parts can add time, so use the schedule service link to reserve a bay and reduce wait time.

• Standard service window: ~60 minutes
• Book online to minimize onsite waiting
• Technicians perform a multi-point check while oil is changed

The manufacturer-recommended oil service interval for many 5.7L Ram engines is commonly around 6,000 miles under normal driving.

For the 2017 Ram 3500, adjust intervals for severe-duty conditions—frequent short trips, heavy towing, canyon climbs, or dusty roads around Sandy and the Wasatch Front—by shortening to roughly half the normal interval. Keep service records to support warranty coverage and long-term maintenance history.

• Normal driving: ~6,000 miles between oil changes
• Severe-duty (towing, frequent short trips, dusty conditions): consider ~3,000 miles
• Track mileage and service receipts for warranty documentation

The 2017 Ram 3500 with the 5.7L V8 is typically serviced with a full-synthetic oil meeting the OEM viscosity spec (commonly 5W-20).

Using OEM-spec full synthetic oil helps maintain cold-start pumpability in Sandy winters and protects the engine during heavy towing runs into the canyons. Our service technicians use factory-recommended oils and filters to meet warranty and performance expectations.

• Full-synthetic oil per OEM viscosity spec (commonly 5W-20)
• OEM-style filter installed to match factory flow and bypass specs
• Recommended for towing and stop-and-go Salt Lake Valley traffic

The 2017 Ram 3500 5.7L V8 engine typically requires about 6.0 quarts of oil with a filter change.

That capacity is the service fill amount; technicians verify crank oil level on the dipstick after the engine reaches normal operating temperature. Towing heavy loads in the Wasatch foothills can increase heat stress, so maintaining proper level is important for longevity.

• Service fill: ~6.0 quarts with filter change
• Technician checks and adjusts oil level after engine run
• Top-off checks included in the multi-point inspection

A dealer oil change typically includes OEM-spec oil and filter plus a detailed multi-point inspection and documented service records, while a quick-lube may be cheaper for basic conventional services.

Choosing a dealer service helps preserve factory maintenance records and ensures OEM fluid specs are followed—important for heavy-duty usage such as towing or warranty concerns. Quick-lube shops offer speed and lower cost for routine conventional changes but may not provide factory-specific parts or record-keeping.

• Dealer: OEM-spec oil/filter, documented service history, multi-point inspection
• Quick-lube: faster turnaround and often lower cost for conventional oil
• Consider dealer service for towing, warranty support, or fleet vehicles

Skipping scheduled oil changes can jeopardize warranty claims if you cannot provide timely maintenance records showing compliance with the OEM schedule.

Warranty coverage depends on following the manufacturer‑recommended maintenance schedule and retaining service records. Service completed by a certified dealer or qualified facility with documented receipts provides the clearest proof if warranty work is needed.

• Keep dated service records and receipts to support warranty claims
• Dealer service entries are straightforward to verify for manufacturers
• Regular oil changes reduce the risk of engine-related warranty denials

Full-synthetic oil provides the best high-temperature protection and cold-start flow for the 2017 Ram 3500's 5.7L V8 compared with conventional or blend oils.

Full synthetics resist breakdown during towing runs and canyon driving common around Sandy, while synthetic blends offer improved protection over conventional oil at a lower cost than full synthetic. The manufacturer recommends OEM-spec full synthetic for optimal longevity and performance.

• Full synthetic: superior thermal stability and cold-start protection
• Synthetic blend: balance of protection and cost for moderate use
• Conventional: lowest cost, suitable for low-stress driving only

The 2017 Ram 3500 is often used for towing, hauling, and frequent canyon runs—duties that increase oil stress. Serving Sandy, Draper, and South Jordan from our location on 10905 South Auto Mall Drive, our technicians factor in local driving: cold winter starts, dusty valley roads, and steep canyon grades when recommending service intervals. We have a team of certified technicians familiar with Ram heavy-duty engines and fleet needs.

Scheduling is available online; use the schedule service link to reserve a time. If you plan to tow to Little Cottonwood Canyon or routinely haul heavy loads, mention that when you book so the service advisor can prepare appropriate inspections and fluids.

The 2017 Ram 3500 with the 5.7L V8 is typically serviced with full-synthetic oil meeting the OEM viscosity spec (commonly 5W-20) and requires about 6.0 quarts with filter change. Following OEM oil viscosity and filter recommendations helps maintain horsepower and torque delivery—especially important when towing up to high capacities on steep grades. Severe-duty use (frequent towing, dusty conditions, or frequent short trips) shortens service intervals and increases the importance of full-synthetic protection. Bring your 2017 Ram 3500 to Larry H. Miller Chrysler Jeep Dodge Ram Sandy in Sandy for an OEM-spec oil change — schedule service.

A typical dealer oil change for the 2017 Ram 3500 includes draining old oil, replacing the OEM-spec filter, refilling with factory-recommended full-synthetic oil, and completing a multi-point inspection. Technicians top off critical fluids, check tire pressures, and inspect brakes, belts, and visible suspension components. Service is documented on your vehicle record to help preserve warranty eligibility and resale value.

We recommend checking the service specials before booking. To book, schedule appointment online or call us directly at (801) 555-0123.