2019 Dodge Challenger Air Filter
Dodge Air Filter service at Larry H. Miller Chrysler Jeep Dodge Ram Sandy in Sandy, UT Frequently Asked QuestionsFrequently Asked Questions
11 common questions answered
How much does it cost to replace the air filter in a 2019 Dodge Challenger?
Engine air filter replacement typically runs about $30–$60 and cabin air filter replacement typically runs about $40–$80.
Those ranges reflect common parts and labor for the 2019 Dodge Challenger’s 3.6L V6; Larry H. Miller Chrysler Jeep Dodge Ram Sandy provides up‑front pricing and uses OEM‑spec filters on request. Local driving conditions around the Salt Lake Valley can push service toward the higher end of the range during dusty seasons.
- OEM‑spec engine filter: $30–$60 (parts + labor)
- OEM‑spec cabin filter: $40–$80 (parts + labor)
- Up‑front pricing and inspection included at the dealer
How often should I replace the engine air filter on a 2019 Dodge Challenger?
Replace the engine air filter on the 2019 Dodge Challenger every 30,000 miles as a general guideline.
Driving on dusty Wasatch Front roads, commuting along I‑15, or frequent canyon runs can require earlier replacement; visually inspect the filter sooner if you notice dirt buildup. Larry H. Miller Chrysler Jeep Dodge Ram Sandy can inspect the intake and advise based on local conditions.
- OEM guideline: 30,000 miles (adjust for conditions)
- Inspect sooner in dusty or high‑pollen seasons
- Dealer inspection checks the intake housing and MAF sensor
How often should I replace the cabin air filter on a 2019 Dodge Challenger?
Replace the cabin air filter on the 2019 Dodge Challenger every 15,000 miles as a typical interval.
Sandy and surrounding South Valley communities experience seasonal pollen and dust that can load the cabin filter faster than normal; more frequent replacement maintains HVAC airflow and reduces odors. Our technicians can inspect the cabin filter during routine service visits.
- Typical interval: 15,000 miles
- Replace sooner with heavy pollen or dusty-road exposure
- Dealer inspection includes HVAC airflow and filter condition
Where is the engine air filter located on a 2019 Dodge Challenger?
The engine air filter on the 2019 Dodge Challenger is located in the airbox in the engine bay, typically near the front passenger side of the engine compartment.
Access is usually through the airbox cover which is secured by clips or fasteners; replacement is straightforward but requires checking the intake ducting and mass airflow (MAF) sensor for debris. Our service team inspects the entire intake housing when replacing the filter.
- Filter location: engine bay airbox (front passenger side area)
- Technician inspects intake ducting and MAF sensor
- Airbox fasteners removed for safe, clean replacement
What's the difference between an engine air filter and a cabin air filter on a 2019 Dodge Challenger?
The engine air filter cleans combustion intake air for the 2019 Dodge Challenger’s 3.6L V6; the cabin air filter cleans air entering the vehicle’s HVAC system for passengers.
The engine filter protects engine performance and fuel economy, while the cabin filter protects occupants from dust, pollen and road debris. Both are important: one for mechanical health, the other for air quality and HVAC efficiency.
- Engine filter: protects intake and engine performance
- Cabin filter: filters pollen, dust, and HVAC contaminants
- Different locations and replacement procedures
What are the signs of a clogged air filter on a 2019 Dodge Challenger?
Common signs are reduced engine power and lower fuel economy for the engine filter, and weak HVAC airflow or musty odors for the cabin filter.
On the 2019 Dodge Challenger you may notice sluggish acceleration or a rougher idle when the engine filter is clogged; a clogged cabin filter reduces HVAC efficiency and can cause unpleasant odors. Early inspection helps prevent related component strain.
- Engine: reduced power, rough idle, decreased fuel economy
- Cabin: weak ventilation, odors, increased dust inside cabin
- Dealer inspection can confirm cause and recommend replacement
Can I replace the air filter on my 2019 Dodge Challenger myself, or should Larry H. Miller Chrysler Jeep Dodge Ram Sandy do it?
Yes — the engine air filter is often DIY‑friendly; the cabin filter can be more involved and many owners prefer dealer service for a full inspection.
The engine airbox is usually accessible and the filter can be swapped with basic tools, while the cabin filter may require glove box removal or trim access. Dealer service includes an intake/MAF inspection and guarantees OEM‑spec parts if that matters to you.
- DIY: engine filter accessible with basic tools
- Dealer: cabin filter access and HVAC checks included
- Dealer service includes intake/MAF visual inspection
How long does it take to replace the air filters on a 2019 Dodge Challenger at Larry H. Miller Chrysler Jeep Dodge Ram Sandy?
Typical filter replacement service for the 2019 Dodge Challenger takes about 30 minutes for the engine filter and 30–45 minutes if the cabin filter is included.
Timing depends on access and whether both filters are replaced; our technicians perform a quick intake and HVAC inspection while the job is completed. Schedule an appointment online to reserve a service bay and avoid wait time.
- Engine filter: ~30 minutes
- Engine + cabin: ~30–45 minutes total
- Schedule service: schedule appointment
2019 Dodge Challenger Air Filter Service in Sandy
The 2019 Dodge Challenger’s 3.6L V6 is engineered for responsive performance, and clean intake air keeps that performance consistent. In Sandy and the southern Salt Lake Valley, seasonal pollen and occasional dust from nearby canyons shorten filter life; drivers who commute along I‑15 or travel gravel canyon roads should inspect filters more often. Our service team at Larry H. Miller Chrysler Jeep Dodge Ram Sandy will evaluate filter condition, check the intake housing and mass airflow sensor, and recommend replacement when necessary.
We serve neighborhoods across Sandy, Draper and South Jordan and are conveniently located at the Sandy Auto Mall near major landmarks like America First Field. For a clear recommendation and OEM‑spec parts, schedule service or review current offers on our service specials.
2019 Dodge Challenger Air Filter Specifications
The 2019 Dodge Challenger with the 3.6L V6 (engine code 6VNAG3.6) uses a dedicated engine intake air filter sized for that airbox and a separate cabin filter for the HVAC system. OEM‑recommended intervals commonly call for engine filter inspection around 30,000 miles and cabin filter replacement around 15,000 miles, with more frequent service in dusty or high‑pollen conditions. Typical cargo and vehicle packaging mean the cabin filter is accessed behind the glove box or HVAC plenum while the engine filter sits in the airbox in the engine bay.
Common callouts include accelerated loading in dusty canyon runs and pollen seasons; our technicians check intake seals and the MAF sensor during replacement. Bring your 2019 Dodge Challenger to Larry H. Miller Chrysler Jeep Dodge Ram Sandy in Sandy for OEM-spec filter service — schedule service.
What's Included in a 2019 Dodge Challenger Air Filter Replacement
A standard air filter service for the 2019 Dodge Challenger includes inspection and replacement of the engine air filter, inspection and replacement of the cabin filter when requested, a visual intake housing check, and a mass airflow (MAF) sensor inspection. Technicians document filter condition, verify seals and fasteners, and test HVAC airflow after cabin filter service. We provide up‑front pricing and can install OEM‑spec filters on request.
Warranty terms for parts and service are provided at time of sale; please ask the advisor about coverage details when you arrive. To book time, schedule appointment or review current service specials.