2019 Dodge Challenger Oil Change in Sandy, UT

The typical oil change cost for a 2019 Dodge Challenger at Larry H. Miller Chrysler Jeep Dodge Ram Sandy runs $69–$129, with up-front pricing provided by the service department.

That price range reflects options for conventional or OEM-recommended full synthetic oil and includes labor at our Sandy Auto Mall location. Pricing covers recommended oil and filter choices for the Challenger’s 3.6L V6 and any required fluid top-offs; exact cost depends on oil type and parts used.

• Range: $69–$129 quoted up-front
• Includes oil and filter change plus basic inspection
• Final price depends on synthetic vs. conventional oil

Most oil changes for a 2019 Dodge Challenger at our dealership take about 45 minutes from check-in to completion.

Time can vary with appointment load and whether additional inspections or services are requested. Our technicians at the Sandy service center work to complete the oil drain, filter replacement, fluid top-offs, and a multi-point inspection while you wait or on a scheduled appointment.

• Estimated duration: ~45 minutes
• Includes oil drain, new filter, and multi-point inspection
• Schedule to reduce wait: schedule service

Follow the manufacturer’s recommended interval shown in your owner’s manual—commonly around every 8,000 miles for regular driving, with shorter intervals under severe conditions.

In Sandy’s climate, cold winters and canyon trips with frequent cold starts can qualify as severe duty; in those cases the interval shortens and more frequent checks are prudent. Maintaining dealer service records here protects warranty documentation and helps technicians monitor engine condition for the Challenger’s 3.6L V6.

• Standard interval: follow the owner’s manual (manufacturer recommendation)
• Severe duty (cold-starts, towing, short trips) requires shorter intervals
• Dealer records document maintenance for warranty purposes

The 2019 Dodge Challenger with the 3.6L V6 uses OEM-recommended viscosity and oil type—commonly a full synthetic meeting factory specifications.

Using the OEM-spec oil ensures cold-start protection in Utah winters and supports engine performance across the Challenger’s 305 hp 3.6L V6. Our service technicians select oil that meets factory standards and install the correct Mopar-approved filter when performing the service.

• OEM-recommended viscosity and spec (factory-approved full synthetic)
• Installed with a Mopar or OEM-equivalent filter
• Supports warranty compliance when documented on service records

The 2019 Dodge Challenger’s engine oil capacity should be filled to the level specified in the owner’s manual and confirmed by the service technician during the oil change.

Technicians measure and top the oil to the correct mark on the dipstick to avoid overfill or underfill. At our Sandy service center we also record the exact quantity used on your service invoice for transparency and future reference.

• Quantity confirmed and recorded by the technician
• Fill to owner’s manual/dipstick specification every change
• Service report lists quantity used for your records

Dealer service includes OEM-spec oil and filter, a multi-point inspection, and documented service records; quick-lube shops are often less expensive for conventional oil but may not provide the same OEM documentation.

Choosing dealer service preserves a clear maintenance history tied to your vehicle and uses factory-approved parts—factors that matter for warranty work and long-term care of the Challenger’s 3.6L V6. Quick-lube shops can be convenient for basic, lower-cost services if you don’t require OEM documentation.

• Dealer: OEM-spec oil/filter, inspection, documented records
• Quick-lube: faster, often cheaper for conventional oil
• Decide based on warranty needs and desired documentation

Failing to follow the manufacturer’s maintenance schedule can jeopardize warranty coverage; documented, timely oil changes protect your warranty claim eligibility.

Warranty terms require adherence to scheduled maintenance and proof of service. Service records from certified facilities like our Sandy center help demonstrate compliance if warranty work is needed on the Challenger’s engine.

• Keep dated service records to support warranty claims
• Certified facility documentation is accepted for warranty work
• Ask service advisors to note maintenance intervals on your invoice

Full synthetic oil offers the best high- and low-temperature protection for the 2019 Dodge Challenger’s 3.6L V6; blends and conventional oils provide adequate protection for less demanding use but differ in stability and longevity.

Full synthetic resists breakdown during hot canyon drives and cold Utah winters, preserving engine performance and extending intervals between changes when recommended by the manufacturer. Your choice should align with the owner’s manual and driving habits.

• Full synthetic: highest thermal stability and cold-start protection
• Synthetic blend: compromise between cost and performance
• Conventional: acceptable for basic, short-interval service

The 2019 Dodge Challenger’s 3.6L V6 requires oils and procedures that match factory recommendations; our service team in Sandy applies those specifications while accounting for local conditions. We serve Sandy, Draper, and South Jordan residents and commuters who use I-15 for daily travel to the Silicon Slopes or weekend canyon runs. Cold winters and frequent short trips can increase oil degradation, so technicians emphasize correct viscosity and proper fill levels for the Challenger before you head to nearby ski areas or family destinations.

Our service appointments can be made online—schedule service—and we post seasonal offers on the service specials page. For quick directions, we are located at the Sandy Auto Mall near 10905 South Auto Mall Drive, convenient to America First Field and The Shops at South Town.

An oil change for a 2019 Dodge Challenger at our service center follows a clear sequence: drain the old oil, replace the oil filter with an OEM or equivalent part, install the correct factory-spec oil, and top off other fluids as needed. We perform a multi-point inspection that checks belts, hoses, brakes, and tire pressures, and we document the work on your invoice to support warranty requirements.

If you prefer to space payments, please ask our service advisors about available financing options when you arrive. To book your appointment, schedule service or call the service desk to discuss specific needs; the phone number is listed on our website.

For the 2019 Dodge Challenger with the 3.6L V6, the service technician will use the factory-recommended oil viscosity and an OEM-approved filter to preserve engine performance across a wide rpm band (305 hp at 6,350 rpm, 268 lb-ft at 4,800 rpm). During the oil change we verify oil level visually and with the dipstick to ensure correct quantity and pressure, and we note any engine-related issues observed during the inspection.

Bring your 2019 Dodge Challenger to Larry H. Miller Chrysler Jeep Dodge Ram Sandy in Sandy for an OEM-spec oil change — schedule service.