2019 Ram Promaster Cargo Van Air Filter

The engine air filter is housed in a rectangular airbox in the engine bay, typically on the passenger-side near the intake path.

On the 2019 Ram Promaster Cargo Van with the 3.6L V6, the airbox is accessible from the engine compartment without major disassembly. Local Sandy roads and seasonal dust mean the housing should be checked visually during routine service.

• Located inside the engine bay in a removable rectangular airbox
• Accessible without specialized tools for a basic inspection
• Technician will check the intake and MAF area for debris

The cabin air filter is located behind the glove box and is accessible after dropping or removing glove-box trim panels.

Access to the cabin filter on the 2019 Ram Promaster Cargo Van usually requires opening the glove box and lowering a retention panel; some clips or fasteners may need to be removed. In Sandy’s pollen seasons, this filter can load faster and restrict HVAC airflow.

• Found behind the glove box panel in the passenger compartment
• May require removing retaining clips to access the filter slot
• Dealer inspection will confirm orientation and seal condition

The engine air filter protects the 3.6L V6 intake for combustion; the cabin air filter cleans incoming HVAC air for passengers.

They serve separate systems: the engine filter prevents dust and debris from entering the intake, preserving performance and emissions; the cabin filter traps pollen, dust, and particulates that affect cabin air quality. Both should be inspected during scheduled service in Sandy, where dust and pollen loading vary seasonally.

• Engine filter = combustion protection, located in engine bay
• Cabin filter = HVAC/passenger air quality, located behind glove box
• Replacing both maintains 280 hp performance and in-cabin comfort

Signs include reduced engine responsiveness relative to the 280 hp rating, lower fuel economy, rough idle, reduced HVAC airflow, or a musty odor in the cabin.

For a working vehicle like the 2019 Ram Promaster Cargo Van, drivers may notice slower acceleration under load or heavier throttle response when the engine air filter is clogged. A loaded cabin filter will reduce blower airflow and can produce stale or musty smells—important for crews who run extended routes around Sandy and Draper.

• Reduced acceleration or throttle response
• Lower fuel efficiency on city/highway drives
• Weak HVAC airflow or musty cabin odor

The engine air filter is often DIY-friendly; the cabin filter can be DIY but sometimes requires trim removal—dealer service adds inspection and documented fitment verification.

Many owners with basic tools can swap the engine air filter in the 2019 Ram Promaster Cargo Van, while the cabin filter may need careful panel removal to avoid broken clips. A dealer appointment provides a visual intake/MAF check and confirms OEM-spec filter fit, which is useful for fleet vehicles and warranty-sensitive work.

• Engine filter: typically accessible and replaceable by owners
• Cabin filter: may need glove-box panel removal and care with clips
• Dealer inspection includes intake/MAF visual check and documented service

Larry H. Miller Chrysler Jeep Dodge Ram Sandy offers OEM-spec filter options and can confirm correct fitment for the 2019 Ram Promaster Cargo Van.

For fleet or owner-operators who want factory-fit parts, the dealership can supply and install filters that meet the manufacturer’s specifications and document the parts used. This is useful for preserving documented maintenance records for warranty or resale in the South Valley market.

• OEM-spec filters available on request
• Installation documented on service orders for records
• Technicians verify filter fit and sealing during service

Most air filter replacements are completed during a single service visit; exact time depends on inspection findings and any additional cleaning required.

Simple engine air filter swaps are quick, while cabin filter access or follow-up cleaning of the intake/MAF circuit can add time. For drivers commuting via I-15 or servicing fleets around Sandy, we can often coordinate a same-day appointment—use the online scheduler to reserve a slot.

• Typically completed in a single visit unless additional work is found
• Inspection includes intake and MAF visual checks
• Schedule service online to confirm availability

The 2019 Ram Promaster Cargo Van is equipped with a 3.6L V6 (engine code 6VNAG3.6) and uses an engine air filter designed to protect the intake path for combustion. The cabin filter serves the HVAC system and helps control dust and pollen entering the passenger area. For exact part numbers and OEM recommendations, consult the vehicle owner’s manual or the parts department. Bring your 2019 Ram Promaster Cargo Van to Larry H. Miller Chrysler Jeep Dodge Ram Sandy in Sandy for OEM-spec filter service — schedule service.

Service typically begins with a visual inspection of the engine airbox, cabin filter housing, and the intake/MAF area. We remove and replace the selected filter(s), check seals and housing condition, and clear any loose debris from the filter housings. The service record notes the parts used and the condition of related components to help with fleet maintenance planning. Parts warranty terms are provided on-site with parts documentation. To book, schedule service or view current service specials.

We serve Sandy, Draper, and South Jordan from the Sandy Auto Mall area, a convenient stop just off I-15 for commuters and local businesses. Sandy’s seasonal pollen and valley dust mean more frequent checks for working vans and commercial fleets. Our technicians will inspect filters, confirm fitment for the 3.6L V6, and advise on next steps based on local road and weather conditions. Bring your 2019 Ram Promaster Cargo Van to Larry H. Miller Chrysler Jeep Dodge Ram Sandy in Sandy for OEM-spec filter service — schedule service.