2020 Jeep Gladiator Air Filter in Sandy, UT

The engine air filter is located in a rectangular airbox in the engine bay, ahead of the 3.6L V6 intake.

On the 2020 Jeep Gladiator the filter sits in the forward engine compartment to protect the V‑6 intake from dust and road debris. Access is usually from the top of the engine bay; clips or screws hold the airbox cover. Local drivers who hit unpaved canyon roads should inspect the element more often due to higher dust loading.

• Rectangular airbox in the front engine bay
• Accessible from above with basic hand tools
• Inspect more often after dusty/off‑road use

The cabin air filter is located behind the glove box in the HVAC housing.

For the 2020 Jeep Gladiator you typically remove or lower the glove box to reach the cabin filter access panel. Cabin filters protect occupants from pollen, road dust and vehicle exhaust that can be pulled into the HVAC system—important for families and allergy sufferers in Sandy and nearby communities.

• Access panel behind or below the glove box
• Designed to filter pollen, dust and road particulates
• Replacement can require trim/box lowering for access

The engine air filter cleans intake air for the 3.6L V6; the cabin air filter cleans the air entering the passenger compartment through the HVAC system.

The engine filter protects combustion components and sensors from abrasive dust and debris that can reduce power or damage the intake. The cabin filter focuses on occupant comfort and health by trapping pollen, dust and odors before air reaches passengers. Both filters affect vehicle performance and comfort but serve distinct systems.

• Engine filter → combustion air, motor protection
• Cabin filter → HVAC air, passenger comfort
• Both require inspection after dusty or seasonal changes

Engine-side signs include reduced acceleration and lower fuel economy; cabin-side signs include weak HVAC airflow and musty odors.

On the 2020 Jeep Gladiator, a restricted engine filter can make the 3.6L V6 feel sluggish and may cause the engine to work harder, particularly when towing or driving uphill. A clogged cabin filter is noticeable as reduced fan flow, slower defrosting and stale or musty air from vents—especially during spring pollen season in the Salt Lake Valley.

• Engine: reduced throttle response, lower mpg
• Cabin: weak blower, bad odor, poor defrost
• Inspect after dusty trips or heavy pollen seasons

You can usually replace the engine air filter yourself, while the cabin filter may require glove-box removal and dealer assistance for cleaner access and inspection.

Do‑it‑yourself replacement of the engine filter is common because the airbox is accessible and uses clips or screws. The cabin filter on the 2020 Jeep Gladiator often needs glove box lowering and careful reseating to avoid breaking clips. Dealer service adds a visual intake and MAF inspection and ensures an OEM‑spec filter fit.

• Engine filter: user‑friendly access, basic tools
• Cabin filter: glove‑box removal may be needed
• Dealer includes inspection of intake and sensors

The service department uses OEM‑spec replacement filters when available to match factory fit and filtration performance.

OEM‑spec filters are specified to meet the 2020 Jeep Gladiator's airflow and filtration requirements for the 3.6L V6 and HVAC system. Using an OEM‑spec part preserves system performance and helps keep warranty coverage intact for related components. Ask service advisors about part provenance before your appointment.

• OEM‑spec filters for correct fit and rating
• Dealer can confirm part origin at check‑in
• Installation includes basic component inspection

You can schedule air filter service online at /service/index.htm or by visiting the dealership service desk in the Sandy Auto Mall.

Use the online schedule service page to pick a convenient appointment time for your 2020 Jeep Gladiator. The service center is centrally located in the Sandy Auto Mall, convenient for drivers from Draper, South Jordan and the Wasatch foothills who need filter checks after canyon trips or seasonal pollen peaks.

• Online booking: /service/index.htm
• Service specials listed at /specials/service.htm
• Convenient access off I‑15 in Sandy, UT

Dealer inspection typically includes visual checks of both engine and cabin filters, an intake housing check and a MAF sensor visual inspection.

For the 2020 Jeep Gladiator technicians confirm filter condition, ensure proper seating of the element, examine the intake ducting and look at the mass‑air sensor for contamination. These checks identify issues that a simple element swap might miss, such as torn seals or debris in the intake path after off‑road use.

• Engine and cabin filter condition check
• Intake housing and duct visual inspection
• MAF sensor visual check and cleaning recommendation

The air filter replacement service for a 2020 Jeep Gladiator covers a step‑by‑step inspection and replacement workflow. Technicians remove and inspect the engine air filter element and its housing, replace the element if needed, and verify proper sealing of the intake tract. For the cabin filter they access the HVAC housing (often by lowering the glove box), inspect and replace the filter element, and verify blower operation and vent flow. The intake and mass‑air sensor receive a visual inspection to spot contamination that could affect engine performance. Parts installed follow OEM‑spec recommendations where available, and the service includes proper disposal of old filters.

You can view current offers on our service specials and schedule service online.

Serving Sandy, Draper and South Jordan, our service team understands local driving patterns and their effects on the 2020 Jeep Gladiator's filters—frequent canyon runs, valley dust and spring pollen can all accelerate wear. The dealership is located in the heart of the Sandy Auto Mall with easy access from I‑15, making drop‑offs simple for Silicon Slopes commuters and weekend outdoor drivers. During seasonal peaks we recommend more frequent cabin filter checks to maintain HVAC airflow and comfort. Contact the service desk to discuss inspection frequency based on your driving habits and local road conditions.

Directions, hours and online booking are available via the service scheduler.

The 2020 Jeep Gladiator is powered by a 3.6L V6 engine that uses a dedicated engine air filter sized to meet factory airflow and filtration specifications; the vehicle also uses a separate cabin air filter for the HVAC system. Specific part numbers vary by options and production date; service advisors will confirm OEM‑spec replacement parts for the engine intake and HVAC. Common callouts include heavier dust loading after off‑road use and pollen accumulation during spring in the Salt Lake Valley. Bring your 2020 Jeep Gladiator to Larry H. Miller Chrysler Jeep Dodge Ram Sandy in Sandy for OEM-spec filter service — schedule service.