2020 Ram 1500 Oil Change in Sandy, UT

$89–$139 is a common dealer-range for a full-service synthetic oil change at Larry H. Miller Chrysler Jeep Dodge Ram Sandy, with up-front pricing provided at check-in.

Final cost depends on the oil type and whether additional services are required. Our service advisors list inclusions before work begins so you see parts and labor. Sandy drivers towing or frequently driving in dusty or cold conditions should expect possible additional top-offs or filter services.

• Includes labor and oil; filter extra if specified in the estimate
• Up-front price quoted at check-in
• Service specials may lower the price: service specials

Plan for about 60 minutes for a full-service oil change at our dealership service center.

This time covers draining old oil, installing an OEM-spec filter, topping fluids, a multi-point inspection, and tire pressure checks. During busy seasonal peaks—like pre-ski season weekends—appointment availability can affect turnaround; using the online scheduler helps reserve a convenient slot.

• Typical service window: ~60 minutes
• Includes multi-point inspection and fluid top-offs
• Reserve time via schedule service

Many owners follow roughly a 7,500-mile interval for normal driving; severe-duty conditions warrant shorter intervals (commonly 3,000–5,000 miles).

Sandy’s seasonal temperature swings and frequent canyon trips can create severe-duty conditions—cold starts, towing, or dusty roads—that accelerate oil degradation. Consult your owner’s manual for the manufacturer’s recommended interval and keep service records to support future warranty or resale needs.

• Normal driving: ~7,500 miles between oil changes
• Severe duty (towing, frequent short trips, dusty conditions): 3,000–5,000 miles
• Keep records of dealer service for warranty documentation

The 2020 Ram 1500 with the 3.6L V6 typically uses full synthetic motor oil specified by the OEM (commonly 5W-20 specification).

Full synthetic provides better cold-start protection and thermal stability for modern V6 engines. Our technicians use oils that meet factory specifications to preserve engine performance and maintenance records.

• OEM-recommended viscosity: commonly 5W-20
• Full synthetic preferred for engine protection and longevity
• Technicians install OEM-spec oil and filters during service

The 3.6L V6 in the 2020 Ram 1500 commonly requires about 6.0 quarts of oil including the filter change.

Exact capacity can vary slightly by engine code and whether the filter is drained; your owner’s manual lists the precise number for your VIN. Our service team confirms capacity and tops to the exact fill mark during the oil change.

• Typical capacity: ~6.0 quarts (with filter)
• Service techs verify and fill to the manufacturer-specified level
• Records note the exact quantity used for your vehicle

Dealer service provides OEM-spec oil and filters plus a documented multi-point inspection, which can be important for warranty and long-term maintenance records.

Quick-lube shops can be faster and sometimes cheaper for basic conventional oil changes. Dealer work is documented on factory records, uses recommended parts and fluids, and includes diagnostic checks that often catch early issues—useful if you plan to keep the truck long-term or need warranty support.

• Dealer: OEM-spec oil/filter, factory records, multi-point inspection
• Quick-lube: often faster, sometimes lower cost for conventional oil
• Choose based on warranty needs, long-term ownership plans, and service inclusions

Full synthetic offers superior high-temperature stability and cold-start protection compared with conventional and synthetic blend oils, which is why OEM guidance commonly favors full synthetic for modern V6 engines.

Full synthetic maintains viscosity at higher temperatures and resists breakdown under towing or steep-grade driving—conditions common to drivers leaving the Salt Lake Valley for the canyons. Synthetic blends are a middle ground; conventional oils provide basic lubrication but need more frequent changes.

• Full synthetic: best thermal stability and cold-start protection
• Synthetic blend: improved protection over conventional at lower cost than full synthetic
• Conventional: lowest cost, shorter change intervals

Our 2020 Ram 1500 oil change follows a step-by-step process to meet factory recommendations and document service for your vehicle’s maintenance history. The service begins with draining the old oil and replacing the OEM-spec filter. Technicians then install full synthetic oil to the factory fill specification, perform a multi-point inspection that covers brakes, belts, hoses, and fluid levels, and top off washer, transmission, and coolant fluids as needed.

We also check tire pressures and visually inspect the undercarriage for leaks or damage common to regionally driven trucks. Service records are kept with your vehicle file to support warranty claims and resale value. For current discounts, see the service specials. To book, schedule service.

The Sandy Auto Mall location serves Sandy, Draper, South Jordan and surrounding South Valley communities. Local climate—cold winters and dusty summers—affects oil life: frequent cold starts and canyon drives increase stress on the oil and engine. Our service advisors consider your commute pattern (Silicon Slopes commuters and weekend canyon travelers) when recommending intervals and oil grades for the 2020 Ram 1500.

We perform maintenance using dealership tools and parts that meet manufacturer specifications. Appointments help minimize wait time; use the online scheduler to pick a convenient slot. Drive to 10905 South Auto Mall Drive or call the service desk from our website to get directions and estimated arrival instructions. Bring your 2020 Ram 1500 to Larry H. Miller Chrysler Jeep Dodge Ram Sandy for an OEM-spec oil change — schedule service.

The 2020 Ram 1500 equipped with the 3.6L V6 typically calls for a full synthetic motor oil in a factory-recommended viscosity and a capacity of about 6.0 quarts with filter change; verify your VIN-specific capacity in the owner’s manual. Recommended oil viscosity commonly used is 5W-20 for this engine, which balances cold-start flow with hot-running protection. Using the specified oil type supports engine longevity and helps maintain documented maintenance history.

There are occasional service bulletins for oil consumption or sensor updates on certain Ram engines; technicians check for open technical service bulletins during your appointment. Bring your 2020 Ram 1500 to Larry H. Miller Chrysler Jeep Dodge Ram Sandy in Sandy for an OEM-spec oil change — schedule service.