2020 Ram 2500 Oil Change

The typical dealer oil-change price range is $89–$169; Larry H. Miller Chrysler Jeep Dodge Ram Sandy provides up-front pricing for service.

Dealer pricing includes OEM-spec oil and filter and a full vehicle check that many quick-lube locations do not perform. For the 2020 ram 2500 with a 6.4L V8, dealer service also factors in heavier-duty disposal and the labor for a larger-capacity engine.

• Includes OEM-spec oil and filter replacement
• Multi-point inspection for towing and mountain use
• Up-front written pricing at LHM Sandy Jeep

An average dealer oil change appointment completes in about 45 minutes to 1 hour at Larry H. Miller Chrysler Jeep Dodge Ram Sandy.

Time varies with shop schedule and whether additional services (multi-point inspection, fluid top-offs) are requested. The 2020 ram 2500's larger sump and filter area can add a few minutes versus smaller passenger cars, especially when technicians verify trailer-ready systems.

• Plan for a 45–60 minute service window
• Schedule online to reduce wait: schedule service
• Technicians confirm oil type and filter fit for 6.4L V8 models

Follow the manufacturer's recommended interval in your owner's manual; many Ram 2500 owners schedule oil changes every 7,500–10,000 miles under normal use.

Severe-duty conditions common in the Salt Lake Valley — cold winter starts, canyon towing, and dusty summer roads — can shorten effective oil life. If you regularly tow heavy loads or drive in stop‑and‑go traffic to Draper or Salt Lake City, consider shorter intervals and discuss severe-service recommendations with our technicians.

• Normal driving: follow owner's manual interval
• Severe duty (towing, canyon trips): shorten interval and document service
• Keep records at LHM Sandy Jeep to support maintenance history

Use OEM-recommended oil grade and specification listed in the 2020 ram 2500 owner's manual; dealers install the OEM-specified oil and filter for the 6.4L V8.

Oil viscosity and synthetic vs. blend depend on the exact engine and operating climate. Our service technicians confirm the correct oil spec for your 2020 ram 2500 and will install the appropriate OEM oil to preserve engine performance and warranty coverage.

• Technician verifies OEM oil spec for the 6.4L V8
• Full synthetic often recommended for heavy-duty use
• We document the oil grade on your service record

Your service technician confirms the 2020 ram 2500's oil capacity and fills to the OEM-specified level during an oil change.

Capacity varies by engine and whether the oil cooler or filter has been drained; for the 6.4L V8, technicians measure and top to the factory fill specification to ensure proper oil pressure and pick-up. Always use a dealer or qualified technician to avoid under- or over-filling.

• We fill to the exact OEM capacity during service
• Technicians account for filter and oil cooler volume
• Oil level and leak check performed after fill

Dealer service includes OEM-spec oil and filter, a multi-point inspection, and documented service records, which many quick-lube shops do not provide.

Quick-lube centers can be convenient and cost-effective for basic changes, but dealer service is focused on OEM specifications for the 2020 ram 2500's 6.4L V8 and on maintaining a complete service history for warranty and resale. Choose based on your priorities: lowest up-front cost versus documented, OEM-spec maintenance.

• Dealer: OEM parts, full inspection, service records
• Quick-lube: faster turnaround, often lower price for conventional oil
• Consider dealer service before long towing trips or canyon driving

Skipping scheduled oil changes can jeopardize warranty claims if damage is tied to lack of maintenance, and documented service records are commonly required for warranty coverage.

For the 2020 ram 2500, keeping clear, dated service records—preferably with dealer or certified-shop invoices—helps demonstrate proper maintenance. If warranty work is needed, manufacturers typically review maintenance history to determine coverage eligibility.

• Keep invoices showing oil type, mileage, and service dates
• Dealer records at LHM Sandy Jeep are stored for easy retrieval
• Document severe-duty service if you tow or drive in harsh conditions

Full synthetic oil offers greater high- and low-temperature stability compared with conventional or blend oils and is commonly recommended for heavy-duty engines like the 6.4L V8 in the 2020 ram 2500.

Synthetic oils resist breakdown under towing loads and extreme cold starts in Utah winters, protecting the 2020 ram 2500's engine and helping maintain performance. Our technicians will recommend the appropriate oil category based on your driving patterns and the OEM recommendation.

• Conventional: adequate for light use, lower cost
• Blend: middle ground of protection and cost
• Full synthetic: superior protection for towing and extreme climates

The 2020 ram 2500 is often used for towing, hauling and canyon driving around the Salt Lake Valley, which affects oil life and maintenance needs. We serve Sandy, Draper, and South Jordan residents who commute along I‑15 or head up Little Cottonwood Canyon for recreation. Our technicians apply factory procedures when servicing the 6.4L V8 to preserve performance for highway and heavy-duty use. Service appointments are recommended during peak seasons — schedule online to reserve a bay and reduce wait time: schedule service.

Technicians perform condition checks that matter locally: cold-start performance in winter, dust and road-salt inspection in spring, and towing-system checks before canyon trips. We provide clear direction after inspection and can quote additional maintenance needs before starting work.

An oil change for the 2020 ram 2500 at Larry H. Miller Chrysler Jeep Dodge Ram Sandy follows a step-by-step service flow: drain old oil, replace OEM-spec filter, install correct-grade oil to OEM capacity, and verify oil pressure and level. Technicians complete a multi-point inspection and top off fluids as needed, check tire pressures, and record service in your vehicle history.

We document all work and keep your records accessible for warranty or resale needs. For service offers, check our service specials. To book an appointment, schedule service or call the dealership.

The 2020 ram 2500's 6.4L V8 is a heavy-duty engine built for towing and sustained highway loads; technicians use OEM-specified oil grades and filters to meet the engine's needs. Because oil type and exact capacity can depend on engine option and installed oil cooler, our service team confirms the correct specification for your truck before starting work.

Bring your 2020 ram 2500 to Larry H. Miller Chrysler Jeep Dodge Ram Sandy in Sandy for an OEM-spec oil change — schedule service.