2022 Chrysler Pacifica Air Filter in Sandy, UT

The engine air filter for the 2022 Chrysler Pacifica is mounted in a rectangular housing in the engine bay, toward the front near the air intake housing.

On the Pacifica with the 3.6L V6, the airbox sits near the front of the engine compartment for easy visual access. In Sandy’s dusty months, that location makes the filter prone to quicker dust loading after canyon runs or prolonged highway commutes. Technicians at Larry H. Miller Chrysler Jeep Dodge Ram Sandy inspect the housing seal and intake plumbing for tears or loose clamps when replacing the filter.

• Located in the engine bay near the front intake housing
• Accessible without major dash or trim removal
• Inspected for housing cracks and intake-duct condition during service

The cabin air filter on the 2022 Chrysler Pacifica is located behind the glove box in the passenger compartment.

Access typically requires dropping or partially lowering the glove box to reach the filter access panel; the design keeps the filter away from road spray but exposes it to pollen and interior dust. During peak pollen season in Sandy and Draper, cabin filters can clog faster and reduce HVAC flow, so our technicians check the seal and slot alignment when they replace the filter.

• Behind the glove box inside the passenger compartment
• Requires glove-box access rather than engine-bay entry
• Checked for seal integrity and proper seating during replacement

The engine air filter cleans combustion intake air for the 3.6L V6, while the cabin air filter cleans air entering the passenger HVAC system.

The engine filter protects the throttle body, MAF sensor and engine cylinders from dust and debris; a clogged element can reduce power or fuel economy. The cabin filter traps pollen, dust and road pollutants to protect passengers and HVAC components. Technicians treat each system differently: the engine intake is checked for leaks and MAF contamination, while the cabin side is checked for odor sources and HVAC airflow.

• Engine filter = combustion air (protects engine and sensors)
• Cabin filter = HVAC/passenger air (improves interior air quality)
• Different locations and inspection steps for each replacement

Common signs include reduced engine acceleration or fuel economy, rough idle for the engine filter, and weak HVAC airflow or musty odors for the cabin filter.

With the Pacifica’s 287-hp 3.6L V6, drivers may notice sluggish throttle response or a drop in MPG when the engine filter is heavily restricted. Cabin-side issues appear as reduced vent airflow, louder blower noise, or new odors when HVAC runs. Sandy’s seasonal pollen and canyon dust can accelerate these symptoms between regular intervals.

• Engine: reduced power, lower fuel economy, rough idle
• Cabin: weak airflow, unusual HVAC odors, increased dust inside cabin
• Inspect both filters if either symptom is present

The engine air filter is often a DIY-friendly service; the cabin filter can be DIY but may require glove-box removal and trim care.

Many owners can change the engine filter with basic tools and a clean workspace; the cabin filter swap needs careful glove-box handling to avoid broken stops or misaligned clips. Dealer service adds an intake and MAF sensor inspection, proper OEM-part fitment and disposal, plus documentation of service for warranty records. If you’re unsure, schedule service and we’ll advise.

• Engine filter: usually straightforward for DIY
• Cabin filter: may need glove-box removal and trim care
• Dealer provides inspection, OEM-spec parts and service records

Yes — when available we install factory-design filters (Mopar) specified for the 2022 Chrysler Pacifica.

Using Mopar or manufacturer-spec filters helps maintain the Pacifica’s filtration performance and fitment for the 3.6L V6 and HVAC system. OEM-spec parts reduce the risk of fitment gaps or incompatible pleat counts that can affect airflow or sensor readings. Ask service advisors about part origin when you schedule an appointment.

• Factory-design (Mopar) filters used when available
• OEM fit and filtration matched to Pacifica HVAC and intake
• Part origin confirmed at time of service

Filter replacements are typically completed during a short service visit; many engine- or cabin-filter swaps can be done within an hour.

Actual time depends on whether both engine and cabin filters are replaced and whether additional checks (MAF inspection, intake housing check) are required. Peak seasonal demand in the Salt Lake Valley can extend wait times, so we recommend you schedule service to reserve a convenient slot.

• Typical single-filter swap: often under 1 hour
• Both filters + inspections: allow additional time
• Scheduling reduces wait during busy seasons

Check both filters more frequently during dusty seasons or after regular canyon trips—inspect them at every oil change or roughly every few thousand miles.

The Pacifica’s cabin and engine filters load faster in the Salt Lake Valley during dry months and high-pollen periods. Rather than a single fixed interval, visual inspection at routine service catches heavy contamination early. Our technicians will recommend replacement timing based on observed condition and local road or pollen exposure when you visit Larry H. Miller Chrysler Jeep Dodge Ram Sandy.

• Inspect filters at routine oil changes
• Check sooner after canyon drives or dusty construction routes
• Replace earlier if you notice performance or HVAC symptoms

We follow a step-by-step approach when servicing the 2022 Chrysler Pacifica’s intake and cabin filtration systems. A typical appointment includes a visual inspection of the engine airbox and filter element, removal and proper disposal of the old component, and installation of an OEM-spec or equivalent replacement filter matched to the Pacifica’s 3.6L V6. Technicians also inspect the intake housing and clamps, check the MAF sensor for contamination, and test engine idle and airflow after service. For the cabin side, the glove-box access panel is removed, the filter is inspected and replaced, and HVAC airflow and vent seals are verified.

Service documentation is provided with every replacement; parts labor and inspection steps are itemized on your receipt. Warranty coverage for installed parts is handled per dealer policies and manufacturer terms — please ask the advisor for details at checkout. To arrange service, schedule service.

The 2022 Chrysler Pacifica is equipped with a 3.6L V6 (engine code 6VNAG3.6) and a dedicated engine intake filter sized for the engine bay airbox; the cabin filter is sized to the Pacifica HVAC housing behind the glove box. The Pacifica’s combustion air demands correspond with its rated 287 hp at 6,400 rpm and 262 lb-ft of torque at 4,000 rpm, so proper filtration protects the MAF sensor and intake tract. Common service callouts we watch for include pleat collapse, oil contamination from nearby leaks, and seal gaps that allow unfiltered air bypass. Bring your 2022 Chrysler Pacifica to Larry H. Miller Chrysler Jeep Dodge Ram Sandy in Sandy for OEM-spec filter service — schedule service.

We service drivers from Sandy, Draper and South Jordan with attention to local conditions: Wasatch Front dust, seasonal pollen, and winter road treatments can accelerate filter wear on the Pacifica. Our service advisors understand common commuter patterns along I-15 and recommend inspections timed to your driving—whether daily Silicon Slopes commutes or weekend canyon trips. Appointments are handled at our Sandy Auto Mall location, where we document work and confirm fitment for Mopar or OEM-spec filters. For convenience and to avoid seasonal wait times, schedule appointment or check current service specials.