2025 Ram ProMaster Cargo Van Air Filter in Sandy, UT

The engine air filter replacement typically runs $40–$90 and the cabin filter runs $35–$75; Larry H. Miller Chrysler Jeep Dodge Ram Sandy provides up-front pricing.

Those ranges reflect OEM-spec parts and typical shop labor. At our Sandy service center we include an inspection of the intake housing and a visual check of the MAF sensor with each filter service so you get a clear scope of work before we proceed.

• Engine air filter price range: $40–$90
• Cabin air filter price range: $35–$75
• Up-front pricing and intake/MAF visual inspection included

The OEM-recommended engine air filter interval for this vehicle is 30,000 miles.

Because Sandy and the South Valley experience dusty roads and seasonal pollen, we often recommend more frequent inspections during high-dust months. If you operate in heavy stop-and-go city routes or off-highway work sites, check the filter at shorter intervals and replace if visibly soiled.

• OEM engine filter interval: 30,000 miles
• Inspect earlier in dusty or high-pollen seasons
• We perform a visual intake and MAF check with each service

The OEM-recommended cabin air filter interval for this vehicle is 15,000 miles.

Cabin filter life shortens quickly in high-pollen spring months and when regularly driving unpaved roads around the Wasatch front. If HVAC airflow is reduced or occupants notice dust or odors, replace the cabin filter sooner to restore airflow and interior air quality.

• OEM cabin filter interval: 15,000 miles
• Replace sooner with heavy pollen or dusty road exposure
• Cabin filter usually accessed behind the glove box

The engine air filter is located in the engine bay inside the air filter housing near the front of the 3.6L V6 intake assembly.

On the 2025 Ram ProMaster Cargo Van the housing is readily accessible for inspection and replacement, but we also inspect the intake tube and mass airflow (MAF) sensor for contamination while the housing is open. For the cabin filter, check behind the glove box where the HVAC intake is typically placed.

• Engine air filter: in the engine bay air filter housing
• Technician inspects intake housing and MAF sensor
• Cabin filter: generally behind the glove box (HVAC intake)

The engine air filter cleans incoming air for combustion; the cabin air filter cleans air entering the passenger HVAC system.

The engine filter protects engine components and preserves fuel economy and power, while the cabin filter removes dust, pollen, and particulates from the air occupants breathe. Both should be replaced per OEM intervals or earlier under heavy dust or pollen conditions common in Sandy and the surrounding valleys.

• Engine filter → combustion air, affects performance and economy
• Cabin filter → HVAC/passenger air quality and odor control
• Different housings and replacement procedures for each filter

Engine symptoms include reduced power and lower fuel economy; cabin symptoms include weak HVAC airflow and a musty odor.

If you notice sluggish acceleration under load in the 3.6L V6 or the HVAC fan seems weaker, those are common indicators of restricted airflow. In Sandy’s dusty season, inspect both filters promptly to avoid longer-term soot buildup or HVAC contamination.

• Engine: reduced throttle response, drop in mpg, rough idle
• Cabin: decreased HVAC airflow, odors, increased dust in the cabin
• Inspect filters sooner during dusty road use or pollen season

You can often replace the engine air filter yourself; the cabin filter can be DIY-friendly but sometimes requires glove-box trim removal—our technicians perform both with an intake/MAF inspection.

DIY replacement is feasible for owners comfortable with basic engine-bay access. Choosing dealer service adds OEM-spec parts, a visual MAF sensor check, proper disposal, and documented service records that support warranty protection where applicable.

• Engine filter: typically straightforward for DIY
• Cabin filter: may need glove-box removal or trim tools
• Dealer service includes OEM parts and intake/MAF inspection

Filter replacement service is typically completed in about 45 minutes at our Sandy service center.

This timeframe covers the engine and cabin filter replacement plus a brief intake housing and MAF visual inspection. For seasonal peak periods we recommend schedule service online to secure a preferred appointment window.

• Typical duration: about 45 minutes
• Includes intake housing and MAF visual check
• Use the online schedule service link to book

Our 2025 Ram ProMaster Cargo Van air filter service follows a step-by-step process aligned with OEM guidance. We start with a visual inspection of the engine air filter and the cabin filter to assess contamination, then remove and replace the appropriate OEM-spec parts. Technicians inspect the intake housing and mass airflow (MAF) sensor for debris or oil contamination and clean or flag any issues found for the customer’s approval. Work steps typically include documentation of part numbers, disposal of old filters, and a test run to confirm restored airflow and engine response.

Warranty terms for parts are honored per the dealership’s parts warranty: parts coverage extends for 24 months or 24,000 miles and warranty repairs should be performed at a certified facility to maintain coverage. For convenience, schedule service online or call us; the service desk accepts payment and often lists current offers under service specials.

Call to schedule: 10905 South Auto Mall Drive (use our online scheduler for fastest booking).

Serving Sandy, Draper, and South Jordan from 10905 South Auto Mall Drive, Larry H. Miller Chrysler Jeep Dodge Ram Sandy understands how local routes and climate affect filter life. The southern Salt Lake Valley gets seasonal pollen and dusty road conditions that increase particulate loading in both engine and cabin filters. Our team has served this market for 30 years and our certified technicians (12 on staff) follow manufacturer steps when replacing filters to protect engine performance and interior air quality.

Bring your 2025 Ram ProMaster Cargo Van in before long trips to Little Cottonwood Canyon or after extended work-site exposure. You can view current service offers under service specials or schedule service online for a convenient appointment.

The 2025 Ram ProMaster Cargo Van is equipped with a 3.6L V6 (engine code 6VNAG3.6) and uses OEM-specified engine and cabin filters sized to suit its front-wheel-drive layout and high-roof cargo packaging. OEM-recommended intervals are 30,000 miles for the engine air filter and 15,000 miles for the cabin filter, but local dust and pollen can warrant earlier replacement. Common service callouts include intake tube inspection and MAF sensor checks when filters are heavily soiled or contaminated.

Common notes for this vehicle: maintain filter changes to protect the 276-hp 3.6L V6 from soot buildup and to preserve HVAC performance in the van’s large cargo/passenger area (463 cu ft cargo capacity). Bring your 2025 Ram ProMaster Cargo Van to Larry H. Miller Chrysler Jeep Dodge Ram Sandy in Sandy for OEM-spec filter service — schedule service.