2026 Ram 3500 Alignment

Get a full alignment every 2–3 years or about 30,000 miles, and any time you replace suspension parts or suffer a major pothole impact.

For the 2026 Ram 3500, regular service prevents uneven tire wear and maintains towing stability given its 34,590 lb towing capability. Local roads around Sandy and the Wasatch Front can produce potholes and frost‑heave that change alignment quickly, so check alignment after noticeable impacts or after replacing components.

• Recommended interval: 2–3 years or ~30,000 miles
• After suspension repairs or tie‑rod replacement
• After hitting a large pothole or curb

Typical signs include uneven tire wear, the truck pulling to one side, an off‑center steering wheel, or vibration at speed.

These symptoms are especially important to watch on the 2026 Ram 3500 because its heavier curb weight (6,628 lb) and towing loads magnify steering and wear issues. If you see feathering or cupping on tires after a few thousand miles, bring the truck in for an inspection at our Sandy location.

• Uneven or accelerated tire wear
• Vehicle drifts or pulls left/right
• Steering wheel off‑center while driving straight

A four-wheel alignment includes inspection, measurement and adjustment of caster, camber, and toe to factory specs, plus printed before/after readings and a road test.

The service for the 2026 Ram 3500 uses OEM alignment targets for front and rear, an electronic printout showing corrections made, and a suspension inspection to identify worn components that could prevent the alignment from holding. In Sandy we also note local road impacts that commonly affect adjustments.

• Suspension and tie‑rod inspection before adjustments
• Caster, camber, and toe adjusted to factory spec with printout
• Final road test to verify steering and tracking

If worn tie rods, ball joints, wheel bearings, or struts are present, alignment alone often won’t hold and those components must be replaced first.

Our technicians inspect steering and suspension components on the 2026 Ram 3500 before adjusting alignment; heavy towing and rugged Utah roads increase component stress. If wear is found we’ll document the parts that need replacement so the alignment will remain within specification afterwards.

• Inspection flags worn tie rods, ball joints, or bushings
• Alignment performed after necessary repairs to ensure stability
• We document findings and recommend specific repairs

Not always; if it truly tracks straight and tires show even wear, you can defer, but align after 30,000 miles, any suspension work, or if you tow frequently.

The 2026 Ram 3500’s heavy-duty role—regular towing or hauling—makes keeping factory alignment worthwhile to protect expensive tires and maintain safe handling. For local drivers in Sandy who use canyon or construction routes, occasional checks prevent small offsets from becoming costly wear patterns.

• Check tires for even wear before scheduling
• Align after suspension replacement or heavy towing use
• Seasonal checks if you drive on rough or winter roads often

Yes—Larry H. Miller Chrysler Jeep Dodge Ram Sandy performs four‑wheel alignments at 10905 South Auto Mall Drive using factory procedures and printed before/after readings.

We service local drivers from Sandy, Draper, and South Jordan and account for regional road conditions that affect the 2026 Ram 3500. To book a session, use our online scheduler or check current service offers before you arrive.

• Service location: 10905 South Auto Mall Drive, Sandy, UT
• Online booking available via our schedule service page
• Check available deals on service specials

The 2026 Ram 3500 combines a 6.4‑L V8 and rear‑wheel drive architecture that benefits from precise alignment when loaded or towing. Serving Sandy, Draper, and South Jordan, we recognize how local commute patterns—short freeway hops on I‑15, canyon access, and seasonal roadwork—affect suspension geometry. Our technicians calibrate the 2026 Ram 3500 to factory dimensions after inspecting steering linkages and tires.

Bring the 2026 Ram 3500 in if you plan a heavy towing season or after noticeable steering changes. Appointments are easy to make: schedule service. If you want to see current pricing options, check our service specials. Directions and contact are available on our main site.

Alignment for the 2026 Ram 3500 focuses on caster, camber, and toe at both front and rear where adjustable. Technicians use OEM alignment targets and computerized rack systems to measure and correct angles to factory values. The 2026 Ram 3500’s curb weight (6,628 lb) and high towing capacity make maintaining these specs critical for even tire wear and stable towing behavior.

Common local callouts for the 2026 Ram 3500 include offset after pothole impacts and camber changes following curb strikes. We document before/after printouts so you have a recorded baseline. Bring your 2026 Ram 3500 to Larry H. Miller Chrysler Jeep Dodge Ram Sandy in Sandy for a factory-spec alignment — schedule service.

A standard four‑wheel alignment for the 2026 Ram 3500 at our facility includes a multi‑point suspension inspection, tire pressure and condition check, and electronic measurement of caster, camber, and toe. Technicians adjust all angles to factory specifications and produce a printed before/after readout. We perform a final road test to confirm tracking and steering-center return.

The process: inspect steering & suspension components; verify tire condition and pressures; measure angles with OEM targets; adjust caster, camber, toe; print before/after results; road test. If worn parts are found, we document required repairs so alignment will hold. To book, schedule service.